如下为我司爱泽工业IZE_Industries本月到货WHITTET-HIGGINS相关产品，欢迎致电索取样本资料和产品信息。
WHITTET-HIGGINS垫圈W20
WHITTET-HIGGINS螺母BH-05
WHITTET-HIGGINS螺母BH-06
WHITTET-HIGGINS螺母BH-11
WHITTET-HIGGINS螺母BH20
WHITTET-HIGGINS螺母CNM-12
WHITTET-HIGGINS螺母CNM系列介绍及选型
该系列夹紧螺母具有符合ISO公制标准的轴承螺纹、配合和公差，因此可与越来越多地用于轴承和其他动力传输组件的公制保持装置完全互换。这些螺纹符合ISO 965标准。
轴承面—具有高于面直径的间隙释放的一侧 - 加工成与螺纹的中径轴线成直角，因此一转的跳动总指示器读数偏差不大于：50微米（0.002英寸）用于00至14尺寸，100微米（0.004英寸）用于15至40尺寸。
This series of CLAMP NUTS has the bearing threads specified to the ISO Metric standards, fits, and tolerances thus are fully interchangeable with metric retaining devices increasingly used in bearing and other power transmission assemblies. These threads are in accordance with the ISO Standard 965.
The bearing face - the side with the clearance relief above the face diameter - is machined square to the axis of the pitch diameter of the threads whereby the runout for one revolution has a total indicator reading variance no greater than: 50 Microns (.002 inches) for sizes 00 to 14, 100 Microns (.004 inches) for sizes 15 to 40.
WHITTET-HIGGINS螺母BH系列介绍及选型
该系列BEARHUG锁紧螺母带有尼龙套环，是精密的自锁螺母。它设计用于与N和AN锁紧螺母相同的轴尺寸，但具有自锁和超精密的附加功能，其中它已成为精密轴承和动力传输组件的最重要部件。
这些螺母的轴承面与其螺纹中径之间的跳动具有一圈总指示器读数不大于：00到04尺寸为0.0004英寸，05至20尺寸为0.0006英寸，05到20尺寸为0.0008英寸21 到 40。
座位表面在40微英寸以内。
This series of BEARHUG Locknuts, with a nylon collar, is the mainstay of the precision self-locking nuts. It is designed for the same shaft dimensions as are the N and AN locknuts, but with the added features of self-locking and super precision wherein it has become a most important component for precision bearing and power transmission assemblies.
The runout of the bearing face of these nuts to the pitch diameter of their threads have a one revolution total indicator reading no greater than: .0004 inches for sizes 00 through 04, .0006 inches for sizes 05 through 20, .0008 inches for sizes 21 through 40.
Seating surface is within 40 micro-inches.
WHITTET-HIGGINS垫圈W系列介绍及选型
最常用的锁紧垫圈。它们由足够柔软的材料制成，因此柄脚可以承受组装中的多次锁定和解锁弯曲，但材料足够坚硬以抵抗可能由扳手槽角施加的剪切作用。键沿与柄脚相反的方向弯曲并沿轴轴向弯曲，以安装在轴承座圈下方的轴键槽中，从而为剪切作用提供更大的阻力，并为轴承的内座圈提供支撑。
Most commonly used lockwashers. They are made of a material sufficiently soft so the tangs will withstand several bends of locking and unlocking in assembly, but of a material sufficiently hard to resist the shearing action which may be exerted by the corner of the spanner slots. The key is bent in the opposite direction of the tang and axially to the shaft to fit in a shaft keyway under the bearing race to provide greater resistance to the shearing action and to provide support with the inner race of the bearing.
WHITTET-HIGGINS螺母/垫圈其他型号：
WHITTET-HIGGINS CNM-00
WHITTET-HIGGINS CNM-01
WHITTET-HIGGINS CNM-02
WHITTET-HIGGINS CNM-03
WHITTET-HIGGINS CNM-04
WHITTET-HIGGINS CNM-044
WHITTET-HIGGINS CNM-05
WHITTET-HIGGINS CNM-056
WHITTET-HIGGINS CNM-06
WHITTET-HIGGINS CNM-064
WHITTET-HIGGINS CNM-07
WHITTET-HIGGINS CNM-08
WHITTET-HIGGINS CNM-09
WHITTET-HIGGINS CNM-10
WHITTET-HIGGINS CNM-11
WHITTET-HIGGINS CNM-12
WHITTET-HIGGINS CNM-13
WHITTET-HIGGINS CNM-14
WHITTET-HIGGINS CNM-15
WHITTET-HIGGINS CNM-16
WHITTET-HIGGINS CNM-17
WHITTET-HIGGINS CNM-18
WHITTET-HIGGINS CNM-19
WHITTET-HIGGINS CNM-20
WHITTET-HIGGINS CNM-21
WHITTET-HIGGINS CNM-22
WHITTET-HIGGINS CNM-24
WHITTET-HIGGINS CNM-26
WHITTET-HIGGINS CNM-28
WHITTET-HIGGINS CNM-30
WHITTET-HIGGINS CNM-32
WHITTET-HIGGINS CNM-34
WHITTET-HIGGINS CNM-36
WHITTET-HIGGINS CNM-38
WHITTET-HIGGINS CNM-40
WHITTET-HIGGINS BH-00
WHITTET-HIGGINS BH-01
WHITTET-HIGGINS BH-02
WHITTET-HIGGINS BH-03
WHITTET-HIGGINS BH-04
WHITTET-HIGGINS BH-05
WHITTET-HIGGINS BH-06
WHITTET-HIGGINS BH-065
WHITTET-HIGGINS BH-07
WHITTET-HIGGINS BH-08
WHITTET-HIGGINS BH-09
WHITTET-HIGGINS BH-10
WHITTET-HIGGINS BH-11
WHITTET-HIGGINS BH-12
WHITTET-HIGGINS BH-13
WHITTET-HIGGINS BH-14
WHITTET-HIGGINS BH-15
WHITTET-HIGGINS BH-16
WHITTET-HIGGINS BH-17
WHITTET-HIGGINS BH-18
WHITTET-HIGGINS BH-19
WHITTET-HIGGINS BH-20
WHITTET-HIGGINS BH-21
WHITTET-HIGGINS BH-22
WHITTET-HIGGINS BH-24
WHITTET-HIGGINS BH-26
WHITTET-HIGGINS BH-28
WHITTET-HIGGINS BH-30
WHITTET-HIGGINS BH-32
WHITTET-HIGGINS BH-34
WHITTET-HIGGINS BH-36
WHITTET-HIGGINS BH-38
WHITTET-HIGGINS BH-40
WHITTET-HIGGINS W-00
WHITTET-HIGGINS W-01
WHITTET-HIGGINS W-02
WHITTET-HIGGINS W-03
WHITTET-HIGGINS W-04
WHITTET-HIGGINS W-05
WHITTET-HIGGINS W-06
WHITTET-HIGGINS W-07
WHITTET-HIGGINS W-08
WHITTET-HIGGINS W-09
WHITTET-HIGGINS W-10
WHITTET-HIGGINS W-11
WHITTET-HIGGINS W-12
WHITTET-HIGGINS W-13
WHITTET-HIGGINS W-14
WHITTET-HIGGINS W-15
WHITTET-HIGGINS W-16
WHITTET-HIGGINS W-17
WHITTET-HIGGINS W-18
WHITTET-HIGGINS W-19
WHITTET-HIGGINS W-20
WHITTET-HIGGINS W-21
WHITTET-HIGGINS W-22
WHITTET-HIGGINS W-24
WHITTET-HIGGINS W-26
WHITTET-HIGGINS W-28
WHITTET-HIGGINS W-30
WHITTET-HIGGINS W-32
WHITTET-HIGGINS W-34
WHITTET-HIGGINS W-36
WHITTET-HIGGINS W-38
WHITTET-HIGGINS W-40
WHITTET-HIGGINS W-44
如果您需要完整的WHITTET-HIGGINS相关技术咨询，请随时致电爱泽工业（021-3100 6702），或者访问网站www.ize-industries.com,我们将尽全力解决您的问题。
If you have any question for WHITTET-HIGGINS，please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.
IZE-industries
Contact Information：
Tel：0086-21-31006702 or 0086-21-35350722
Fax：0086-21-35350711
Mobile：0086-189 1750 1433
E-mail：sales@ize-industries.com
Website：www.ize-industries.com
