SEALWELD阀D-SO-BV-CS
SEALWELD适配阀D-FW-LL1-SS
SEALWELD适配阀D-FW-LL2-SS
SEALWELD适配阀D-FWLL-SS-ML
SEALWELD接头D-FW-SO-BH
SEALWELD垫片LL-GSK-ASB
SEALWELD注脂枪G-SGUN-C （含套筒）
SEALWELD注脂枪G-SGN-C
SEALWELD阀D-SO-BV-CS介绍
Sealweld® 旋入式车身排气工具
该工具专门设计用于让您卸下车身润滑脂和密封剂注入接头中的止回球。
在维修多种类型的井口闸阀时，必须使用此工具。
它也是维修井口闸阀时平衡压力的理想选择。
此工具仅适用于碳钢
Sealweld® Screw-On Body Vent Tool
This tool is specifically designed to allow you to un-seat the ball check in the body grease and sealant injection fittings.
This tool is a MUST when servicing many types of wellhead gate valves.
It is also ideal for equalizing pressure when servicing wellhead gate valves.
This tool is available in carbon steel ONLY
SEALWELD适配阀D-FW-LL1-SS介绍
Flow Wolf® Leak-Lock 适配器 #1
圆头接头应急密封装置
将泄漏或损坏的管件转换为安全管件，而无需停机或生产损失。 Sealweld® Leak-Lock 不是永久性维修设备，但应使用到预定的维修时间或管道减压且可以安全更换泄漏管件时。 它还设计用于损坏的纽扣头配件。
Leak-Lock 可用于需要第二个独立止回阀以符合安全规范或公司政策的应用。 它可以永久保留或直到管道减压并且可以安全地更换现有配件。
这种紧急密封装置安装在泄漏或损坏的巨型圆头接头上，并使用可更换的垫圈密封。
Flow Wolf® Leak-Lock Adapter #1
Emergency Sealing Device for Buttonhead Fittings
Convert leaking or damaged fittings into safe fittings without shutdown or loss of production. The Sealweld® Leak-Lock is not a permanent repair device but should be used until a scheduled turn-around or when the pipeline is depressurized and the leaking fitting can be replaced safely. It is also designed for use on damaged buttonhead fittings.
The Leak-Lock can be used in applications where a second independent check valve is required to comply with safety codes or company policy. It can be left on permanently or until the pipeline is depressurized and the existing fitting can be replaced safely.
This emergency sealing device fits on a leaking or damaged giant buttonhead fitting and utilizes a replaceable gasket seal.
SEALWELD适配阀D-FW-LL2-SS介绍
Flow Wolf® 防漏适配器 #2
这种紧急密封装置可将小型圆头接头转换为巨大的圆头接头接头，并使用可更换的垫圈密封件。
Flow Wolf® Leak-Lock Adapter #2
This emergency sealing device converts a small buttonhead fitting to a giant buttonhead fitting fitting and utilizes a replaceable gasket seal.
SEALWELD阀D-FWLL-SS-ML介绍
钢盖 - 防止无人看管时泄漏。
获得专利的 Flow Wolf 螺纹笼，用于安全注入紧急密封剂。
PTFE 垫圈 – 非常适合严重损坏的纽扣头和难以容纳液体和清洁剂。
Steel Cap - Prevents leakage when unattended.
Patented Flow Wolf threaded cage for safely injecting emergency sealants.
PTFE Gasket – ideal for severely damaged buttonheads and hard to hold liquids and cleaners.
SEALWELD接头D-FW-SO-BH介绍
Flow Wolf® 旋入式适配器
该适配器从井口闸阀上常见的标准螺纹接头（阀体润滑脂接头）变为标准的大型圆头接头。
它使您无需更换注射设备上的适配器即可快速维修阀门。 该适配器还延长了配件长度，让您可以接触到那些难以触及的配件。
该转接头现货供应，仅碳钢材质。 可根据特殊要求提供不锈钢或其他材料。
Flow Wolf® Screw-On Adapter
This adapter goes from a standard screw-on fitting (body grease fitting) typically found on wellhead gate valves to a standard large buttonhead fitting.
It allows you to quickly service a valve without changing the adapter on your injection equipment. This adapter also extends the fitting length allowing you to get at those hard-to-reach fittings.
This adapter is available from stock in carbon steel ONLY. Stainless steel or other materials are available by special request.
SEALWELD注脂枪G-SGUN-C介绍
Sealweld® SuperGun® 泵有一个超长的杠杆手柄，使高压注射变得容易。
它重量轻，非常便携。 螺旋填料设计指示桶中剩余的产品量，高压止回阀系统可防止背压引起的危险“反冲”。
SuperGun® 泵的设计能够承受现场使用的严酷条件，并且每个泵在装运前都经过测试。 耐用、易于携带和更快的泵送使其成为阀门技术人员最喜欢的手持式高压密封剂注入泵，用于在仅需要少量润滑剂的情况下进行加注。
The Sealweld® SuperGun® Pump has an extra long lever handle that makes high-pressure injection easy.
It is lightweight and very portable. The screw-primed design indicates how much product remains in the barrel and the high-pressure check valve system prevents dangerous “kicks” caused by back pressure.
The SuperGun® Pump has been designed to withstand the rigors of field use and every pump is tested prior to shipment. Durability, easy to carry and faster pumping make it the valve technician’s favorite hand-held, high-pressure sealant injection pump for topping-up procedures when only small quantities of lubricant are required.
SEALWELD注脂枪/阀/接头/垫片常用型号：
SEALWELD G-EZ-LOARDER
SEALWELD G-UGUN-C
SEALWELD G-HGUN-C
SEALWELD G-SGUN-C
SEALWELD G-A8GUN-C
SEALWELD D-LL-GSK-ASB
SEALWELD F-FW-OA1/4-T-SS
SEALWELD F-FW-OA1/4-SS
SEALWELD F-FW-OA1/4-T-CS
SEALWELD F-FW-OA1/4-CS
SEALWELD D-FWLL2-SS-ML
SEALWELD D-FWLL-SS-ML
SEALWELD D-FW-CAM-SO-CS
SEALWELD D-SO-BV-CS
SEALWELD D-FW-LL1-SS
SEALWELD D-FW-LL2-SS
SEALWELD D-FWLL-SS-ML
SEALWELD D-FW-SO-BH
SEALWELD LL-GSK-ASB
SEALWELD注脂枪G-SGUN-C （含套筒） SEALWELD注脂枪G-SGN-C
如果您需要完整的SEALWELD的相关技术咨询，请随时致电爱泽工业（021-3100 6702），或者访问网站www.ize-industries.com,我们将尽全力解决您的问题。
If you have any question for SEALWELD，please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.
IZE-industries
Contact Information：
Fax：0086-21-35350711
Mobile：0086-189 1750 1433
E-mail：sales@ize-industries.com
Website：www.ize-industries.com
