wieland FC3*1.5 819 meters FFU扁电缆
PN 182 038 BEARING BUSH for EMERGENCY GAS ENGINE ENERATOR PN 201 CONE ( DOCUMENT 7A0205 ) for EMERGENCY GAS ENGINE ENERATOR “WARTSILA” ENGINE TYPE NOHAB WN16V25SG ENGINE NO 399816 I/P MODEL 80648 Brake Resistor 500W 100R POLT-12D/3XI-H1 used for cable N2XSEY 6/10kV 3x95/16 Cable end for high-voltage cables CR-M110AC2L 1SVR405611R7100 RELAY 110VAC 1330350GA04 WIPER BLADE PA701-not available alternative model PA801 Rotary Vane Pumps T1700 COMPUTER FOR PACKAGE REMOTE HMI NETWORK DELL PRECISION T1700 MINI TOWER WORKSTATION MINI TOWER INTEL XEON PROCESSOR WINDOWS 7 PROFESSIONAL 64BITS MEMORY 8GB (2x4GB) 1600MHz DDR3 2 SATA HDDs BOOT HDD 500GB + 2ND HDD 500GB INTEGRATED USB 2 0 VGA RJ 45 SERIAL PORTS DVD +/-RW ACCOMPANIED WITH DELL KEYBOARD AND OPTICAL MOUSE PART NO T1700 RS232/Ethernet model TIBBO DS 100B with adapter DC 12V 1A convertor with adapter ecom? - J2KNpro Easy Abgasanalyseger?tproduct overview - with technical data-sheets
Isolation Amplifier (active) - for DC-signal
Supply Isolation Amplifier - with integrated transmitter supply
AC-Isolation Amplifier (active) - for AC signals
Isolation Transducer (passive) - for DC signals, without power-supply
AC-Isolation Transducer (passive) - for AC signals, without power-supply
Transmitter, Isolation Transmitter - for AC/DC and Pt100 signals
Measuring Value Converter - for Pt100, AC/DC signals, resistance
Measuring Contact - for limiting value capturing
Multi-Function-Converter “VarioCheck” - programmable devices
Indicator Lights/Fault Indicator - LED signal transmitter for errors or operation conditions
Frequency Processing - for initiators according to NAMUR and others
Pulse Processing - Pulse-Summator, Pulse-Scaler, Contact Protection
Power Measuring - for effective and reactive power, phase angle etc.
Excess Voltage Protection - for measuring and mains supply lines
Relay Cards, Coupling Relay - coupling relay, contact protection relays, switching amplifiers
Special Functions - Summator, Electrode relays, min- and maximum Evaluators
Special Development / Fabrication - Information for customer-specific products
Set point Devices and Voltage Supply Devices - for Set point and 24V device power-supply
(Version 01/12)
Signal Drop-Out Indicator - for monitoringlife-zero-signal (4-20mA)
Ex-Components - for signals out of hazardous areas
Indicators “VarioShow” und “VarioLog” - Indicators and data logger (1-8 channel)
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Isolation Amplifier for DC signals
Standard-Isolation-Amplifier, Vario-Isolation-Amplifier, Isolation-Amplifier with setpoint selector, Signal- Multiplier,
Bipolar-Isolation-Amplifier, High-Current-Isolation-Amplifier
AD-TV 24 GL 0/4-20mA 1:1 input/output 20-30VDC GL
Isolation-Amplifier
tv24gl.pdf
AD-TV 22 GL 0/4-20mA 1:1 input/output 20-253V AC/DC GL
Standard-Isolation-Amplifier ALLPOWER
tv22gl.pdf
AD-TV 30 GL 0/4-20mA, 0-10V 0/4-20mA, 0-10V 20-253VDC/50-253VAC GL
Vario-Isolation-Amplifier (adjustable) wide range power supply
tv30gl.pdf
AD-TV 33 GL 0/4-20mA, 0-10V 0/4-20mA, 0-10V 20-253VDC/50-253VAC GL
Vario-Isolation-Amplifier (switchable) wide range power supply
tv33gl.pdf
Version Input Output Power supply Design Data sheet
AD-TV 32 GL 0/4-20mA, 0-10V 0/4-20mA, 0-10V 20-253VDC/50-253VAC GL
Isolation-Amplifier with integrated (1:1 to input or as wide range power supply
setpoint generator (switchable) setpoint)
tv32gl.pdf
AD-TV 320 GS 0/4-20mA, 0-10V with 0/4-20mA, 0-10V 20-253VDC/50-253VAC GS
Setpoint-Isolation-Amplifier with optional transmitter (1:1 to input or as wide range power supply
remote activation, call back contact supply 4-20mA setpoint)
and transmitter supply
tv320gs.pdf
AD-TV 300 GS 0/4-20mA, 0-10V 0/4-20mA,0-10V 20-253V AC/DC GS
Universal-Isolation-Amplifier (all ALLPOWER
signals free selectable over terminal)
tv300gs.pdf
AD-TV 310 0-0,1mA to 0-20mA 0-0,1mA to 0-20mA 20-253V AC/DC GS, GB,
Special Signal-Isolation-Amplifier 0-50mV to 0-500V 0-50mV to 0-20V ALLPOWER EV
(to specify by order) (to specify by order)
tv310.pdf
AD-TV 412 GS 0/4-20mA, 0-10V 0/4-20mA, 0-10V 20-253V AC/DC GS
Isolation-Amplifier (2-channel) (to specify by order) (to specify by order) ALLPOWER
tv412gs.pdf
AD-TV 2 GX 0/4-20mA 1:1 input/output 20-30VDC GX
6,2 mm Isolation Amplifier
tv2gx.pdf
AD-TV 3 GX 0/4-20mA, 0-5V 0/4-20mA, 0-10V 20-30VDC GX
6,2 mm Vario-Isolation-Amplifier 0-10V
(selectable/adjustable)
tv3gx.pdf
AD-TV 1 GX 0-10V 1:1 input/output 20-30VDC GX
6,2 mm Isolation Amplifier
tv1gx.pdf
AD-TV 40 GVC 0/4-20mA, 0-10V 0/4-20mA, 0-10V 20-253VDC/50-253VAC GVC
Vario Isolation Amplifier all (max. 20mA, 10V) (max. 20mA, 10V) wide range power supply
standard-signals selectable
optionally programmable
tv40gvc.pdf
AD-TV 22 GVB 0/4-20mA 1:1 input/output 20-253V AC/DC GVB
Standard-Isolation-Amplifier ALLPOWER
tv22gvb.pdf
AD-TV 24 GVB 0/4-20mA 1:1 input/output 11-30VDC GVB
Isolation-Amplifier
tv24gvb.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Isolation Amplifier for DC signals
Standard-Isolation-Amplifier, Vario-Isolation-Amplifier, Isolation-Amplifier with setpoint selector, Signal- Multiplier,
Bipolar-Isolation-Amplifier, High-Current-Isolation-Amplifier
Version Input Output Power supply Design Data sheet
AD-TV 452 GVC 1x 0/4-20mA, 0-10V 2x 0/4-20mA, 0-10V 20-253VDC/50-253VAC GVC
Signal Multiplier (1 input/2 outputs) wide range power supply
tv452gvc.pdf
AD-TV 350 GA max.-20..0..+20mA or max.-100..0..+100mA 20-30VDC or 80-250VAC GA
High-Current-Bipolar-Isolation- max.-10..0..+10V (to specify by order) (to specify by order)
Amplifier (to specify by order)
tv350ga.pdf
AD-TV 380 GA 0-20mA or 0-10V max. 200mA 20-30VDC GA
High-Current-Isolation-Amplifier (to specify by order) (to specify by order)
tv380ga.pdf
AD-TV 810 GS -20..0..+20mA or -20..0..+20mA or 20-253V AC/DC GS
Bipolar-Isolation-Amplifier (>20 kHz) -10..0..+10V -10..0..+10V ALLPOWER
(to specify by order) (to specify by order)
tv810gs.pdf
AD-TV 200 0/4-20mA, 0-10V 0/4-20mA, 0-10V 20-253V AC/DC (GS) GS, ST
Isolation-Amplifier (1-channel) (to specify by order) (to specify by order) 20-30VDC (ST)
tv200gs.pdf
tv200st.pdf
AD-TV 201-204 0/4-20mA, 0-10V 0/4-20mA, 0-10V 230VAC or 20-30VDC GA,EV
Multi Channel Isolation-Amplifier, up (1-4 channel) (1-4 channel) (to specify by order)
to 4 independent channel
(adjustable and switchable)
tv200ga.pdf
tv200ev.pdf
AD-TV 454 GVF 1x 0/4-20mA, 0-10V 4x 0/4-20mA, 0-10V 20-253VDC/50-253VAC GVF
Signal Multiplier (1 input/4 outputs) wide range power supply
tv454gvf.pdf
AD-TV 452 GS 1x 0/4-20mA, 0-10V 2x 0/4-20mA, 0-10V 20-253V AC/DC GS
Signal Multiplier (1 input/2 outputs) ALLPOWER
tv452gs.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Isolation Amplifier with transmitter supply
Isolation Amplifier with integrated 2/3-wire transmitter supply
Version Input Output Power supply Design Data sheet
AD-STV 2 GX 4-20mA with 0/4-20mA over 20-30VDC GX
6,2 mm Supply-Isolation-Amplifier integrated supply of a trimmer adustablet
2/3-wire Transmitter galvanically isolated
stv2gx.pdf
AD-STH 22 GL 4-20mA with 4-20mA 20-253VDC / 50-253VAC GL
Supply-Isolation-Amplifier fsk- integrated supply of a 1:1 to input wide range power supply
compatible (e.g. HART-Protokol) 2/3-wire Transmitter galvanically isolated
sth22gl.pdf
AD-STV 300 GS 4-20mA with 0-20mA, 4-20mA, 0-10V 20-253VDC / 50-253VAC GS
Universal-Supply-Isolation-Amplifier integrated supply of a (freely selectable) wide range power supply
2/3-wire Transmitter
stv300gs.pdf
AD-TV 320 GS 0/4-20mA, 0-10V with 0/4-20mA, 0-10V 20-253VDC/50-253VAC GS
Setpoint-Isolation-Amplifier with optional transmitter (1:1 to input or as wide range power supply
remote activation, call back contact supply 4-20mA setpoint)
and transmitter supply
tv320gs.pdf
AD-STV 810 GS 4-20mA with 0-20mA, 4-20mA, 0-10V 20-253V AC/DC GS
Fast- Supply-Isolation-Amplifier integrated supply of a (to specify by order) ALLPOWER
(> 20kHz) 2/3-wire Transmitter
stv810.pdf
AD-STV 22 GL 4-20mA with 4-20mA 20-253VDC / 50-253VAC GL
Standard-Supply-Isolation-Amplifier integrated supply of a 1:1 to input wide range power supply
2/3-wire Transmitter galvanically isolated
stv22gl.pdf
AD-STV 40 GVC 0-10VDC, 0/4-20 mA 0/4-20mA, 0-10V 20-253VDC / 50-253VAC GVC
Supply Isolation Amplifier with integr. supply of 2- (freely selectable) wide range power supply
standard-signals selectable (max. 20mA, 10V) /3-wire-transmitters
optionally programmable (max. 20 mA)
stv40gvc.pdf
AD-STV 22 GVB 4-20mA with 4-20mA 20-253VDC / 50-253VAC GVB
Standard-Supply-Isolation-Amplifier integrated supply of a 1:1 to input wide range power supply
2/3-wire Transmitter galvanically isolated
stv22gvb.pdf
AD-STV 24 GVB 4-20mA with 4-20mA 11-30VDC GVB
Supply-Isolation-Amplifier integrated supply of a 1:1 to input
2/3-wire Transmitter galvanically isolated
stv24gvb.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Ex-Components
for operation of an intrinsically safe signals installed in the hazardous area / potentially explosive atmosphere
Version Input Output Power supply Design Data sheet
AD-STVEX 710 GVC 2-wire-transmitter or 0/4-20mA, 0-10V broad-range 20-120VDC/ GVD
Ex-(Supply) Isolation Amplifier activ 0/4-20mA, 0-10V (freely selectable) 50-253VAC (50-60Hz)
(max. 20mA, 10V)
stvex710.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
AD-TV 581 GS 0-1A / 0-5A (50Hz) 0/2-10V and 0/4-20mA 20-253VDC / 50-253VAC GS
Vario AC-Isolation-Amplifier selectable over selectable wide range power supply
(1-channel) terminal (RMS measurement)
tv581gs.pdf
Version Input Output Power supply Design Data sheet
AD-TV 591 GS 0-250VAC / 0-450VAC 0/2-10V and 0/4-20mA 20-253VDC / 50-253VAC GS
Vario AC-Isolation-Amplifier selectable over selectable wide range power supply
(1-channel) terminal (RMS measurement)
tv591gs.pdf
AD-SW 3 GL 3x AC (max. 10A) 3x 0-10V 20-253V AC/DC ALLPOWER GL
Current Transformer
sw3gl.pdf
AC-Isolation Amplifier
for AC signals
AD-SW 3 GL 3x AC (max. 10A) 3x 0-10V 20-253VDC / 50-253VAC SO
Current Transformer in wide range power supply
folding technique
swk3.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Isolation Transducer for DC-signals
without power-supply
Version Input Output Power supply Design Data sheet
AD-TW 41 0/4-20mA 0/4-20mA not required GM,
Standard-Isolating Converter (1-ch) (1:1 to input) ST
tw41gm.pdf
tw41st.pdf
AD-TW 501-502 0-20mA 0-10VDC not required GS
1-2 channel Isolating Converter ST
tw500gs.pdf
tw500st.pdf
AD-TWH 41-48 EV 0/4-20mA 0/4-20mA not required EV
1-8 channel Isolating Converter (1:1 to input)
twh41-48ev
AD-TWH 42 GS 0/4-20mA 0/4-20mA not required GS
1-channel Isolating Converter (1:1 to input)
fsk-able (e.g. HARD)
twh42gs.pdf
AD-TWH 41 0/4-20mA 0/4-20mA not required GM
1-channel Isolating Converter (1:1 to input) ST
fsk-able (e.g. HARD)
twh41gm.pdf
AD-TW 401-408 EV 0/4-20mA 0/4-20mA not required EV
1-8 channel Isolating Converter (1:1 to input)
tw401-408ev
AD-TW 402-403 GS 0/4-20mA 0/4-20mA not required GS
2-3 channel Isolating Converter (1:1 to input)
tw402gs.pdf
tw403gs.pdf
AD-TW 401 0/4-20mA 0/4-20mA not required MO
1-channel Isolating Converter (1:1 to input) GS
ST
tw401mo.pdf
tw401gs.pdf
tw401st.pdf
AD-TW 41-48 EV 0/4-20mA 0/4-20mA not required EV
1-8 channel Isolating Converter (1:1 to input)
tw41-48ev
AD-TW 42 GS 0/4-20mA 0/4-20mA not required GS
Isolating Converter (2-channel) (1:1 to input)
tw42gs.pdf
AD-TW 501-508 EV 0-20mA 0-10VDC not required EV
1-8 channel Isolating Converter
tw500ev.pdf
AD-TW 601-602 4-20mA 0-10VDC not required GS
1-2 channel Isolating Converter ST
tw600gs.pdf
tw600st.pdf
AD-TW 601-608 EV 4-20mA 0-10VDC not required EV
1-8 channel Isolating Converter
tw600ev.pdf
AD-TW 201 ST/GS (1-channel) 4-20mA 4-20mA not required GS
AD-TW 202 GS (2-channel) (1:1 to input) ST
Isolation Converter (max 500 Ohm load)
tw201st.pdf
tw201gs.pdf
tw202gs.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
AC-Isolation Transducer
without power-supply
Version Input Output Power supply Design Data sheet
AD-TW 21 0-1A, 50Hz (sinus) 0-20mA not required GVD
Standard AC-Isolating Converter ST
tw21gvd.pdf
tw21st.pdf
AD-TW 25/3 3x 3x 0-20mA not required GA
3-channel AC-Isolating Converter 0-5A, 50Hz (sinus)
tw25/3ga.pdf
AD-TW 25/2 2x 2x 0-20mA not required GB
2-channel AC-Isolating Converter 0-5A, 50Hz (sinus) GA
tw25/2gb.pdf
tw25/2ga.pdf
AD-TW 25 0-5A, 50Hz (sinus) 0-20mA not required GVD
Standard AC-Isolating Converter ST
tw25gvd.pdf
tw25st.pdf
AD-TW 21/3 3x 3x 0-20mA not required GA
3-channel AC-Isolating Converter 0-1A, 50Hz (sinus)
tw21/3ga.pdf
AD-TW 21/2 2x 2x 0-20mA not required GB
2-channel AC-Isolating Converter 0-1A, 50Hz (sinus) GA
tw21/2gb.pdf
tw21/2ga.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Transmitter Input Output Power supply Design Data sheet
AD-MWT 21 ST 0-10VDC 4-20mA from 2-wire 8-32VDC ST
Measuring-Transmitter Transmitter (passiv) (with output signal)
mwt21st.pdf
TWT 25/2 GS 2x 0-5AAC 2x 4-20mA from 2-wire 8-32VDC GS
2-channel AC-Isolation-Transmitter Transmitter (passiv) (with output signal)
twt25/2gs.pdf
TWT 25 0-5AAC 4-20mA from 2-wire 8-32VDC ST, GS
2-channel AC-Isolation-Transmitter Transmitter (passiv) (with output signal)
twt25st.pdf
twt25gs.pdf
TWT 21/2 GS 2x 0-1AAC 2x 4-20mA from 2-wire 8-32VDC GS
2-channel AC-Isolation-Transmitter Transmitter (passiv) (with output signal)
twt21/2gs.pdf
TWT 21 0-1AAC 4-20mA from 2-wire 8-32VDC ST, GS
AC-Isolation-Transmitter Transmitter (passiv) (with output signal)
twt21st.pdf
twt21gs.pdf
TWT 24 GM 4-20mA (active) 4-20mA from 2-wire 8-32VDC GM
Isolation-Transmitter Transmitter (passiv) (with output signal)
twt24gm.pdf
AD-MWT 50 ST Pt-100 (3-wire) 4-20mA from 2-wire 8-32VDC ST
Measuring-Transmitter (to specify by order) Transmitter (passiv) (with output signal)
mwt50st.pdf
AD-MWT 24 ST 4-20mA 4-20mA from 2-wire 8-32VDC ST
Measuring-Transmitter Transmitter (passiv) (with output signal)
mwt24st.pdf
AD-MWT 22 ST 0-20mA 4-20mA from 2-wire 8-32VDC ST
Measuring-Transmitter Transmitter (passiv) (with output signal)
mwt22st.pdf
Transmitter and Isolation Transmitter (2-wire)
for AC/DC and PT-100 signals
Isolation Transmitter Input Output Power supply Design Data sheet
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Measuring Value-Converter Input Output Power supply Design Data sheet
AD-MV 110 0-100 / 0-5000 Ohm 0-20mA, 4-20mA, 0-10V 20-253VDC / 50-253VAC GS, EV
Potentiometer Signal Converter from Potentiometer (to specify by order) wide range power supply
mv110.pdf
AD-MW 200 ST 10V 0/4-20mA, 0-10V 20-30VDC ST
Signal Transducer (to specify by order) (to specify by order)
not galvanically isolated/4-20mA, 0-
mw200st.pdf
AD-MV 544 GA 4x Pt-100 (temp. range 4x 0/4-20mA, 0-10V 20-30VDC or 230VAC GA
4-channel Pt-100 Transducer is to specify by order) (to specify by order) (to specify by order)
(2/3-wire galvanically isolated
mv544ga.pdf
AD-MV 500/504 GS Pt-100 (temp. range is 0-20mA, 4-20mA, 0-10V 20-253V AC/DC GS
Pt-100 Transducer (2/3-wire or 4-wire) to specify by order) (to specify by order) ALLPOWER
galvanically isolated
mv500gs.pdf
mv504gs.pdf
AD-MV 50/54 GL Pt-100 (temp. range is 0-20mA, 4-20mA, 0-10V 20-253V AC/DC GL
Pt-100 Transducer (2/3-wire or 4-wire) to specify by order) (to specify by order) ALLPOWER
mv50/54gl.pdf
Measuring Value Converter
for Potentiometer-, Pt100 - or DC-signals
VarioCheck AD-VC3 current (± 20mA), 2x analog outputs: wide range power supply GVF
Multi-Converter (programmable) voltage (± 10V), current (max. 20mA), 20-350VDC / 50-253VAC
for DIN rail mounting Potentiometer, voltage (max. 10V)
2/3-wire transmitter
vc3gvf.pdf
manual
order number code:
AD-VC3GVF-R0 - no contact output
AD-VC3GVF-R2 - 2x contact output (change-over contact)
AD-VC3GVF-R4 - 4x contact output (change-over contact)
VarioCheck AD-VC5 resistance 2x analog output: wide range power-supply GVF
Multifunktions-Temperatur- thermometer: current (max. 20mA), 20-350VDC / 50-253VAC
Messumformer PT100, 500, 1000 voltage (max. 10V)
NI100, 500, 1000
thermocouples:
type: J,T,K,E,N,S,R,B
vc5.gvf.pdf
manual
order number code:
AD-VC5GVF-R0 - no contact output
AD-VC5GVF-R2 - 2x contact output (change-over contact)
AD-VC5GVF-R4 - 4x contact output (change-over contact)
:
VarioCheck AD-VC4S current (± 20mA), current (max. 20mA), wide range power-supply FE
Multi-Functional-Converter voltage (± 10V), voltage (max. 10V) 20-350VDC / 50-253VAC
(programmable) for panel mounting potentiometer,
2/3-wire transmitter
vc4s.pdf
manual
order number code:
AD-VC4S-R0 - no contact output and only 1 current output (max. 20mA)
AD-VC4S-R2 - 2x contact output (change-over contact)
AD-VC4S-R4 - 2x contact output (change-over contact)
:
AD-MV 50/54 GX Pt-100 (temp. range is 0-20mA, 4-20mA, 0-10V 18-30VDC GX
Pt-100 Transducer (2/3-wire or 4-wire) to specify by order) (to specify by order)
mv50/54gx.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Version Input Output Power supply Design Data sheet
AD-MK 330 GS 0/4-20mA; 0-10V 2 change-over contact 20-253VDC / 50-253VAC GS
Measuring Contact free selectable wide range power supply
mk330gs.pdf
AD-MK 530 GS Pt-100 2 change-over contact 20-253VDC / 50-253VAC GS
Pt-100 Measuring Contact wide range power supply
mk530gs.pdf
AD-SMK 330 GS 4-20mA with 2 change-over contact 230VAC or 20-30VDC GS
Supply-Measuring Contact integrated 2/3-wire (to specify by order)
Transmitter supply
smk330gs.pdf
Measuring Contact (also with transmitter supply) and Signal-Drop-Out-Indicator
for limiting value capturing and monitoring
Programming Accessory for all VarioCheck devices go to “Multi-Functional-Converter "VarioCheck” on page 11
Multi-Function-Converter Input Output Power supply Design Data sheet
VarioCheck AD-VC3 current (± 20mA), 2x analog outputs: wide range power supply GVF
Multi-Converter (programmable) voltage (± 10V), current (max. 20mA), 20-350VDC / 50-253VAC
for DIN rail mounting Potentiometer, voltage (max. 10V)
2/3-wire transmitter
vc3gvf.pdf
manual
order number code:
AD-VC3GVF-R0 - no contact output
AD-VC3GVF-R2 - 2x contact output (change-over contact)
AD-VC3GVF-R4 - 4x contact output (change-over contact)
VarioCheck AD-VC5 resistance 2x analog output: wide range power-supply GVF
Multifunktions-Temperatur- thermometer: current (max. 20mA), 20-350VDC / 50-253VAC
Messumformer PT100, 500, 1000 voltage (max. 10V)
NI100, 500, 1000
thermocouples:
type: J,T,K,E,N,S,R,B
vc5.gvf.pdf
manual
order number code:
AD-VC5GVF-R0 - no contact output
AD-VC5GVF-R2 - 2x contact output (change-over contact)
AD-VC5GVF-R4 - 4x contact output (change-over contact)
:
VarioCheck AD-VC4S current (± 20mA), current (max. 20mA), wide range power-supply FE
Multi-Functional-Converter voltage (± 10V), voltage (max. 10V) 20-350VDC / 50-253VAC
(programmable) for panel mounting potentiometer,
2/3-wire transmitter
vc4s.pdf
manual
order number code:
AD-VC4S-R0 - no contact output and only 1 current output (max. 20mA)
AD-VC4S-R2 - 2x contact output (change-over contact)
AD-VC4S-R4 - 2x contact output (change-over contact)
:
AD-MK 340 GVD 0/4-20mA; 0-10V 2 change-over contact 20-253VDC / 50-253VAC GVD
Measuring Contact free selectable wide range power supply
mk340gvd.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
VarioCheck for DIN rail Input Output Power supply Design Data sheet
Multi-Function-Converter “VarioCheck”
programmable measuring transducer with LCD-indication
AD-Studio - optional programming software with interface cable for RS-232 or with USB adapter www.adamczewski.com
AD-FEAUFHUT - Mounting kit for mounting front panel devices on DIN Rail
Programming Accessory
Mounting accessories for panel mounting devices:
AD-REDUZIERBL96 - Reduction adapter for mounting 96x48mm devices into a 96x96mm hole
AD-REDUZIERBL144 - Reduction adapter for mounting 96x48mm devices into a 144x144mm hole
VarioCheck AD-VC3 current (± 20mA), voltage 2x analog outputs: wide range power-supply GVF
Multi-Converter (programmable) (± 10V), Potentiometer, current (max. 20mA), 20-350VDC / 50-253VAC
for DIN rail mounting 2/3-wire transmitter voltage (max. 10V)
vc3gvf.pdf
manual
Type codes
AD-VC3GVF-R0 - no contact output
AD-VC3GVF-R2 - 2x contact output (change-over contact)
AD-VC3GVF-R4 - 4x contact output (change-over contact)
:
VarioCheck AD-VC4S current (± 20mA), voltage current (max. 20mA), wide range power-supply FE
Multi-Functional-Converter (± 10V), potentiometer, voltage (max. 10V) 20-350VDC / 50-253VAC
(programmable) for panel 2/3-wire transmitter
mounting
vc4s.pdf
manual
Type codes
AD-VC4S-R0 - no contact output and only 1 current output (max. 20mA)
AD-VC4S-R2 - 2x contact output (change-over contact)
AD-VC4S-R4 - 2x contact output (change-over contact)
:
VarioCheck AD-VC5 resistance thermometer: 2x analog output: wide range power-supply GVF
Multifunktions-Temperatur- PT100, 500, 1000 current (max. 20mA), 20-350VDC / 50-253VAC
Messumformer NI100, 500, 1000 voltage (max. 10V)
thermocouples:
type: J,T,K,E,N,S,R,B
vc5.gvf.pdf
manual
vc5b.pdf
manual
Type codes for devices with display and programming keys:
AD-VC5GVF-R0 - no contact output
AD-VC5GVF-R2 - 2x contact output (change-over contact)
AD-VC5GVF-R4 - 4x contact output (change-over contact)
Type codes for devices without display and programming keys:
AD-VC5B GVF-R0 - no contact output
AD-VC5B GVF-R2 - 2x contact output (change-over contact)
AD-VC5B GVF-R4 - 4x contact output (change-over contact)
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Version Input Output Power supply Design Data sheet
VarioShow AD-VS8 current (max. 20mA) 1-channel (AD-VS8 A1) 20-253VDC / 50-253VAC FE
Indicator voltage (max. 10V) 4-channel (AD-VS8 A4) wide range power supply
8-channel (AD-VS8 A8)
vs8.pdf
VarioLog AD-VL8-S current (max. 20mA) only 4-channel 20-253VDC / 50-253VAC FE
Indicator and data logger with voltage (max. 10V) wide range power supply
integrated transmitter supply
vl8a4s.pdf
VarioLog AD-VL8-G current (max. 20mA) only 4-channel 20-253VDC / 50-253VAC FE
Indicator and data logger with voltage (max. 10V) wide range power supply
galvanic isolated current input
vl8a4g.pdf
VarioLog AD-VL8 current (max. 20mA) 1-channel (AD-VL8 A1) 20-253VDC / 50-253VAC FE
Indicator and data logger voltage (max. 10V) 4-channel (AD-VL8 A4) wide range power supply
8-channel (AD-VL8 A8)
vl8.pdf
VarioShow AD-VS8-S current (max. 20mA) only 4-channel 20-253VDC / 50-253VAC FE
Indicator with integrated transmitter voltage (max. 10V) wide range power supply
supply
vs8a4s.pdf
VarioShow AD-VS8-G current (max. 20mA) only 4-channel 20-253VDC / 50-253VAC FE
Indicator with galvanic isolated voltage (max. 10V) wide range power supply
current input
vs8a4g.pdf
Indicator “VarioShow” and “VarioLog”
Multi-Function-Indicator and Data-Logger (1-, 4- and 8-channel)
AD-Studio - optional programming software with interface cable for RS-232 or with USB adapter www.adamczewski.com
Programming Accessory
AD-FEAUFHUT - Mounting kit for mounting front panel devices on DIN Rail
Mounting accessories for panel mounting devices:
AD-REDUZIERBL96 - Reduction adapter for mounting 96x48mm devices into a 96x96mm hole
AD-REDUZIERBL144 - Reduction adapter for mounting 96x48mm devices into a 144x144mm hole
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Version Input Output Power supply Design Data sheet
AD-LM 6 panel mounting exchangeable 20-30 VDC LM6
LED fault indicator 72x72 mm acc. to order data (only for lamp test
for 6 messages signalling input: operation)
10-30 VDC
lm6.pdf
label-template
Indicator Lights/Fault Indicator
informs about errors or operation conditions via LED signal transmitter
AD-LM 12 panel mounting exchangeable 20-30 VDC LM12
LED fault indicator 72x144 mm acc. to order data (only for lamp test
for 12 messages signalling input: operation)
10-30 VDC
lm12.pdf
label-template
AD-LM 6 vario panel mounting configurable in color 20-253V AC/DC LM6
LED fault indicator 72x72 mm and function
6 messages / 12 inputs signalling input:
AD-Studio software programmable 5-30 VDC
lm6vario.pdf
set-up aid
label-template
AD-LM 12 vario panel mounting configurable in color 20-253V AC/DC LM12
LED fault indicator 72x144 mm and function
12 messages / 24 inputs signalling input:
AD-Studio software programmable 5-30 VDC
lm12vario.pdf
set-up aid
label-template
AD-LM 12 vario panel mounting configurable in color 20-253V AC/DC LM16
LED fault indicator 92x92 mm and function
16 messages / 32 inputs signalling input:
AD-Studio software programmable 5-30 VDC
lm16vario.pdf
set-up aid
label-template
AD-LM 16 panel mounting exchangeable 20-30 VDC LM16
LED fault indicator 96x96 mm acc. to order data (only for lamp test
for 16 messages signalling input: operation)
10-30 VDC
lm16.pdf
label-template
Digital Indicator Lights/Fault Indicator (programmable)
informs about errors or operation conditions via LED signal transmitter
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Version Input Output Power supply Design Data sheet
AD-AF 100 GS current or voltage pulse (relay or open- 20-253VDC / 50-253VAC GS
Analog-Frequency-Converter e.g. 0/4-20mA; 0-10V collector) wide range power supply
(e.g. 0-120Imp/h)
af100.pdf
AD-FM 300 1x frequency analog: 20-253VDC / 50-253VAC FE, GA 3
1-channel (each channel) 1x current (max.20mA) wide range power supply
Analog-Frequency-Converter 1x voltage (max.10V)
(programmable) digital: 2x relay
(change-over contact
fm 00.pdf
AD-FM 250 GVC Initiator e.g. by current (max.20mA) 20-253VDC / 50-253VAC GVC
Frequency-Analog-Converter NAMUR, contact etc. voltage (max.10V) wide range power supply
(with factory setting or via 0-1mHz up to 10KHz
AD-Studio programmable)
fm250gvc
AD-Studio - optional programming software with interface cable and USB adapter www.adamczewski.com
AD-FM 210 GS Initiator frequency 20mA, 4-20mA, 0-10V 20-253VDC / 50-253VAC GS
Frequency-Analog-Converter >100Hz (max. 50kHz) (to specify by order) wide range power supply
(e.g. NAMUR)
fm210.pdf
Frequency Processing
Analog-Frequency-Converter and Frequency-Analog-Converter
AD-FM 600 2x frequency analog: 20-253VDC / 50-253VAC FE, GA
2-channel (each channel) 1x current (max.20mA) wide range power supply
Analog-Frequency-Converter 1x voltage (max.10V)
(programmable) digital: 2x relay
(change-over contact
fm600.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Version Input Output Power supply Design Data sheet
AD-IS 102 2x 2x 20-253V AC/DC GS, EV
Pulse-Adder normally open contact change-over contact ALLPOWER
(2 inputs) optional: open collector
is102.pdf
AD-KI 10 GX 1x 1x 20-30VDC GX
Contact-Protection-Relay normally open contact normally open contact
ki10gx.pdf
AD-IU 114 GA Initiator (e.g. Namur 2 change-over contact 20-30VDC or 230VAC GA
Pulse-Divider max.200Hz), contact (2:1 to 9999:1) (to specify by order)
or voltage level (24V) optional: open collector
iu114ga.pdf
AD-IS 108 8x 2x 20-253V AC/DC GA
Pulse-Adder normally open contact change-over contact ALLPOWER EV
(8 inputs) optional: open collector
is108ga.pdf
is108ev.pdf
AD-IS 104 4x 2x 20-253V AC/DC GA
Pulse-Adder normally open contact change-over contact ALLPOWER EV
(4 inputs) optional: open collector
is104ga.pdf
is104ev.pdf
Pulse Processing
Pulse--Summator, Pulse-Scaler, Contact-Protection
AD-KI 100 GS 1x 2x 20-253V AC/DC GS
Contact-Protection-Relay normally open contact change-over contact ALLPOWER
optional: open collector
ki100gs.pdf
AD-KV 100 GS 1x 2x 20-253V AC/DC GS
Contact-Amplifier normally open contact change-over contact ALLPOWER
optional: open collector
output follows input 1:1
kv100gs.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Version Input Output Power supply Design Data sheet
AD-LU 310 GVC max. 250VAC 2x analog outputs 20-253VDC / 50-253VAC GVC
Power-Measuring-Transducer max. 5A (freely configurable) wide range power supply
freely configurable with AD-Studio
programming software
lu310gvc.pdf
AD-LW 100 GS 3x 180-240 VAC 2x 20-253V AC/DC GS
Load monitoring for 1x 1-5 A normally open contact Allpower
cos-phi and undervoltage
lw100gs.pdf
AD-LU 420 GA 3x 0-230/400 VAC 0-20mA, 4-20mA, 0-10V 20-30VDC or 230VAC GA
Reactive-Power-Transducer 3x 0-1/5 A also bipolar (to specify by order)
3/4-wire (to specify by order)
opt. pulse-output
(change-over contact)
lu420.pdf
AD-LU 120 GA 1x 0-230/400 VAC 0-20mA, 4-20mA, 0-10V 20-30VDC or 230VAC GA
Reactive-Power-Transducer 1x 0-1/5 A also bipolar (to specify by order)
1-phase (to specify by order)
opt. pulse-output
(change-over contact)
lu120.pdf
AD-LU 410 GA 3x 0-230/400 VAC 0-20mA, 4-20mA, 0-10V 20-30VDC or 230VAC GA
Active-Power-Transducer 3x 0-1/5 A also bipolar (to specify by order)
3/4-wire (to specify by order)
opt. pulse-output
(change-over contact)
lu410.pdf
AD-LU 110 GA 1x 0-230/400 VAC 0-20mA, 4-20mA, 0-10V 20-30VDC or 230VAC GA
Active-Power-Transducer 1x 0-1/5 A also bipolar (to specify by order)
1-phase (to specify by order)
opt. pulse-output
(change-over contact)
lu110.pdf
Power Measuring
Effective-, Reactive- or Apparent-Power, Power-Factor (cos-phi), Power-Load-Monitor
AD-Studio - optional programming software with interface cable for RS-232 or with USB adapter www.adamczewski.com
Programming Accessory
AD-LU 610 GVF 3x max. 630VAC 2x analog outputs 20-253VDC / 50-253VAC GVF
Power-Measuring-Transducer 3x max. 5A (freely configurable) wide range power supply
freely configurable with AD-Studio 1x contact output
programming software (freely configurable)
lu610gvf.pdf
AD-LU 610 GA 3x max. 630VAC 2x analog outputs 20-253VDC / 50-253VAC GA
Power-Measuring-Transducer 3x max. 5A (freely configurable)) wide range power supply
freely configurable with AD-Studio 1x contact output
programming software (freely configurable))
lu610ga.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Version (DIN rail mounting) Protection Voltage No. of wires Options Design data sheet
AD-BS 1 90V for 2 measuring lines ST
Coarse Protection
bs1.pdf
AD-üSE 2/3 24V, 33V, 50V for 3 measuring lines üSE
Coarse- and surge-Protection (to specify by order)
üse.pdf
AD-üSE 2/2 24V, 33V, 50V for 2 measuring lines üSE
Course- and surge-Protection (to specify by order)
üse.pdf
AD-üSE 230 for 2 AC power lines üSE
Overload Protection for AC power
230VAC
üse230.pdf
AD-üSE 3-L 24VDC, 48VDC, adapted for high and with transverse voltage üSE
Overload Protection for AC power and 60VDC operating current protection (wire to wire)
with transverse voltage protection (to specify by order) (max. 2A)
for 2 wire
üse3-l.pdf
AD-üSE 2-L 24VDC, 48VDC, for 2 wire adapted for high operating üSE
Overload Protection for AC power 60VDC current (max. 2A)
(to specify by order)
üse2-l.pdf
AD-NS 230 230VAC for 2 AC power lines with failure indication GS
Overload Protection for AC power
ns230.pdf
AD-BS 3 24V; 33V; 50V for 2 measuring lines with transverse voltage ST
Coarse- and surge-Protection with (to specify by order) protection (wire to wire)
transverse voltage protection
bs3.pdf
AD-BS 2 24V; 33V; 50V for 2 measuring lines ST
Coarse- and surge-Protection (to specify by order)
bs2.pdf
AD-üSE 2/4 (24V, 33V, 50V for 4 measuring lines üSE
Coarse- and surge-Protection (to specify by order)
üse.pdf
Excess Voltage Protection
for measuring- and mains supply lines for DIN-rail mounting or with IP-65-ALU-housing
Version (IP-65 protective housing) Protection Voltage No. of wires Options Desgin data sheet
AD-üSE 3/3 24V, 33V, 50V(to for 3 measuring lines with transverse voltage üSE
Coarse- and surge-Protection specify by order) protection (wire to wire)
üse.pdf
AD-üSE 3/2 24V, 33V, 50V for 2 measuring lines with transverse voltage üSE
Coarse- and surge-Protection (to specify by order) protection (wire to wire)
üse.pdf
AD-üSE 3/4 24V, 33V, 50V for 4 measuring lines with transverse voltage üSE
Coarse- and surge-Protection (to specify by order) protection (wire to wire)
üse.pdf
Overload Protection Combination go to next page
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Excess Voltage Protection Combinations
for measuring- und AC power lines within a IP-65 ALU housing
Version (IP-65 protective housing) Protection Voltage No. of wires Option s
AD-üSK 2/2 24V, 33V, 50V and for 2 measuring and 2 üSK
Combination. of coarse-/surge-and 230VAC AC power lines
AC power protection (to specify by order)
üsk.pdf
AD-üSK 3/4 24V, 33V, 50V and for 4 measuring and 2 with transverse voltage üSK
Combination of coarse-/surge-and 230VAC AC power lines protection (wire to wire)
AC power protection (to specify by order)
üsk.pdf
AD-üSK 3/3 24V, 33V, 50V and for 3 measuring and 2 with transverse voltage üSK
Combination of coarse-/surge-and 230VAC AC power lines protection (wire to wire)
AC power protection (to specify by order
üsk.pdf
AD-üSK 3/2 24V, 33V, 50V and for 2 measuring and 2 with transverse voltage üSK
Combination. of coarse-/surge-and 230VAC AC power lines protection (wire to wire)
AC power protection (to specify by order)
üsk.pdf
AD-üSK 2/4 24V, 33V, 50V and for 4 measuring and 2 üSK
Combination of coarse-/surge-and 230VAC AC power lines
AC power protection (to specify by order)
üsk.pdf
AD-üSK 2/3 24V, 33V, 50V and for 3 measuring and 2 üSK
Combination of coarse-/surge-and 230VAC AC power lines
AC power protection (to specify by order
üsk.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Version Configuration Input Output Design
AD-RK 403 EV with 4 relay 24 VDC each 3x EV
Relay Card change-over contact
rk403.pdf
AD-RK 8/2 EV with 8 relay 24 VDC each 2x EV
Relay Card change-over contact
rk8_2.pdf
AD-RK 6/2U EV with 6 relay 24 VDC each 2x EV
Relay Card normally open contact
rk6_2u.pdf
Relay-Cards and Coupling Relay
Relay-Cars with 2, 4 or 8 relays
Signal-Drop-Out Indicator Input Output Power supply Design Data sheet
AD-SAM 201 4-20mA 1 change-over contact 20-30VDC ST, EV
Signal-Drop-Out-Indicator
sam201.pdf
AD-SAM 101 4-20mA open-collector not required ST, EV
Signal-Drop-Out-Indicator
sam101.pdf
Coupling Relay Input Output Power supply Design Data sheet
AD-KR 11 GX 20-30 VDC 1x change over contact 18-30VDC GX
Coupling Relay (1-channel)
ki10gx.pdf
AD-KR 22 GX 20-30 VDC 1x normally open 18-30VDC GX
Coupling Relay (2-channel) contact per channel
ki22gx.pdf
AD-KR 12 GX 20-30 VDC 1x normally open 18-30VDC GX
Coupling Relay (1-channel) contact
ki12gx.pdf
Drop-out Indicator
for monitoring life-zero-signal (4-20mA)
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Setpoint Devices Input Output Power supply Design data sheet
AD-TV 32 GL 0/4-20mA, 0-10V 0/4-20mA, 0-10V 20-253VDC/50-253VAC GL
Isolation-Amplifier with integrated (1:1 to input or as wide range power supply
setpoint generator (switchable) setpoint)
tv32gl.pdf
AD-SV 100 GB nonexistent 24VDC 230VAC GB
Power supply max. 340mA (8W)
sv100gb.pdf
AD-SV 40 GS nonexistent each channel 24VDC, 20-253V AC/DC GS
Power supply max. 50mA, galvanically ALLPOWER
2-channel isolated and with
adjustable current
limiting
sv40gs.pdf
AD-SV 20 GS nonexistent 24VDC, max. 50mA 20-253V AC/DC GS
Power supply with adjustable current ALLPOWER
limiting
sv20gs.pdf
AD-ISW 100 GS potential free contact 0-20, 4-20mA, 0-10V 20-253VDC; 50-253VAC GS
incremental Setpoint-Generator or DC-voltage (to specify by order) wide range power supply
(5-30VDC)
isw100gs.pdf
AD-SWG 311 nonexistent 0-20, 4-20mA, 0-10 230VAC or 20-30VDC GB, EV
Setpoint-Generator 0-99,9% (to specify by order) (to specify by order)
swg311.pdf
AD-SWG 211 nonexistent 0-20, 4-20mA, 0-10V 230VAC or 20-30VDC GS, GB,
Setpoint-Generator 0-99% (to specify by order) (to specify by order) EV
swg211.pdf
AD-TV 320 GS 0/4-20mA, 0-10V with 0/4-20mA, 0-10V 20-253VDC/50-253VAC GS
Setpoint-Isolation-Amplifier with optional transmitter (1:1 to input or as wide range power supply
remote activation, call back contact supply 4-20mA setpoint)
and transmitter supply
tv320gs.pdf
Setpoint Devices and Voltage Supply Devices
Setpoint Devices and 24VDC Power-Supply Devices
Device power supply Input Output Power supply Design Data sheet
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Version Input Output Power supply Design Data sheet
AD-SMV 400 GVC max. 20mA/10V 0/4-20mA, 0-10V broad range GVC
Sum-Data-Amplfiier, programmable max. 4 inputs (freely configruable) 20-253VDC / 50-253 VAC
(summation, subtraction or average (freely configurable)
value of measuring signals)
smv400gvc.pdf
AD-MMA 400 GVC up to 4 input max. or min. broad range GS
Maximum-/Minimum current max. 20mA; input value 1:1 20-253VDC / 50-253 VAC
Value Evaluator voltage max. 10V
mma400gvc
AD-NR 100 E1: 0/4-20mA, 0-10V 1 change-over contact 230VAC or 20-30VDC GB, EV
Follow-up Regulator E2: Poti > 500 Ohm with zero setting (to specify by order)
nr100.pdf
AD-ER 01 3 electrode 1 change-over contact 20-253V AC/DC GS, GB,
Electrode Relay (ground, min, max) ALLPOWER EV
er01gs.pdf
er01gb.pdf
er01ev.pdf
AD-MU 400 GVC max. 20mA/10V 0/4-20mA, 0-10V broad range GVC
Analogue Calculator max. 2 inputs (freely configruable) 20-253VDC / 50-253 VAC
programmable (freely configurable)
mu400gvc.pdf
Special Functions Devices
Measuring Signal Summator, Electrode Relays, min/ and maximum Evaluators etc.
AD-AS 320 GS current or voltage current or voltage broad range GS
Analogue Value Memory 0/4-20mA, 0/2-10V 0/4-20mA, 0/2-10V 20-253VDC / 50-253 VAC
(to specify by order)
as320gs.pdf
AD-SMV 310 0/4-20mA, 0-10V 0-20mA, 4-20mA, 0-10V 20-253V AC/DC GS, GB,
Summation Amplifier max. 4 or 6 inputs (to specify by order) ALLPOWER EV
(summation, subtraction or average (rateable)
value of measuring signals)
smv310.pdf
AD-BV 20 GVC 0/4-20 mA 1:1 to input broad range GVC
Burden Amplifier output burden 20-253VDC / 50-253 VAC
1,3 kOhm
bv20gvc.pdf
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Customer Information
Special development and fabrication of customer-specific devices
For over 30 years the company Adamczewski has developed, fabricated and distributed a wide spectrum of electronic devices.
The applications are spread over many branches in the measuring, control, regulation, process and automation technologies.
Our strengths lie in a total solution of individual problems of our customers, which reaches from development to the later serial
production. Due to exact analysis of the demand, combined with the application of the most modern development and production
technology, a high degree of time and cost efficiency is achieved.
Your advantages in an overview:
- 30-year experience as full service provider of development, material management, logistics and production
- Complete development and production site in Germany, therefore high flexibility of available capacities and low bureaucratic
impediments and, at the same time, achievement of short implementation and turnaround times.
- Most modern production technology (i.e. lead-free shafting and reflow soldering, SMD-automatic apparatus equipping,
automatic laser lettering device)
- Coverage of a lot size spectrum of small series to large series possible.
- High standard of quality (certified according to DIN ISO 9001, ATEX-approval). Fabrication since 01.04.2005 according to
EU-guideline 2002/95/EG(RoHS) or limiting the usage of hazardous substances
Development
Concept phase:
On the basis of the ideas or the specifications of the customer, the first considerations as to feasibility are started. If these
have a positive result, first concepts can be worked out and possibly first pre-trials and calculations can be carried out.
For this we have modern laboratory equipment with power packs, memory oscilloscopes, generators and measuring devices
available. In any case, detailed specifications for the product will be drawn up.
CAD-layout:
The CAD-layout is carried out on our premises. Layout is manual. The experience of our development engineers over many
years and the proximity to the fabrication have a very positive effect on the quality of the layout and therefore on the
entire product. We execute our layouts in fine line print method with structure sizes of approx. 200μm.
More complex layouts are also produced in multi-layer. We use the combined printed circuit/layout programme "EAGLE".
Most of the printed circuit board manufacturers in the meantime accept layouts in EAGLE-format, which makes the
error-prone converting of CAD-data unnecessary.
Prototype/initial sample:
The printed circuit boards for the prototype can be delivered via a printed circuit board quick service within a few days.
Programming:
If it concerns a digital device with micro controller, the device functions are mainly carried out by the device firmware.
The development of this firmware is usually costlier than the hardware development and requires particularly careful
planning in cooperation with the customer, to avoid unnecessary development costs. The micro controller programme
in the programming language "C". Tools such as integral development environments with C-compiler, in-circuit-emulators
and programming devices are available. There is the possibility to parameterized the devices with the PC.
For this there exists a programme, which can easily be adapted to new devices and can be made available to the
customer. Updating of the firmware by the customer via the PC is also possible. The PC programming languages used
are Visual Basic or the new .NET languages such as C#.
Certification:
According to the CE conformity, the EMV guidelines or the low voltage guidelines must be deemed as minimum
requirement. The checking of the EMV guidelines can be carried out on the premises to the greatest possible extent.
Test generators for surge, burst or ESD are available as well as measuring receivers for checking the released
line-conducted errors. The results can be summarised in a report and serve as base for the conformity declaration
of the manufacturer or of the company which sells the devices.
Fabrication:
- Equipping: manual equipping, SMD semi automatic or fully automatic devices
- Soldering: wave soldering bath, reflow oven
- Automatic laser lettering device
- Test: 100%, PC-supported, permanently stored in data base
- Traceability: with the fabrication number, the entire life of the device can be comprehended, from fabrication
through test, despatch and possible service procedures such as repair, recalibration etc.
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Housing and mounting form
Adamczewski housing list
MO-print modul
for soldering in and retrofitting
printing circuit boards
30 x 20 x 16,5 mm
GX - switchboard housing
for DIN rail mounting
width / height / depth
6,2 x 92 101 mm
ST - plug-in module
for DIN rail mounting
width / height / depth
20,8 x 42,5 x 102 mm
VarioCheck switchboard housing
for DIN rail mounting
width / height / depth
33 x 78 x 98 mm
GM - switchboard housing
for DIN rail mounting
width / height / depth
13 x 78 x 98 mm
GB - switchboard housing
for DIN rail mounting
width / height / depth
63 x 100 x 95 mm
GS - switchboard housing
for DIN rail mounting
width / height / depth
23 x 78 x 98 mm
GL - switchboard housing
for DIN rail mounting
width / height / depth
18 x 78 x 98 mm
EV - 19"-euro-board format
depth / height
160 x 100 mm
front panel: 3TE, 4TE, 6TE
GA - switchboard housing
for DIN rail mounting
width / height / depth
100 x 74 x 119 mm
Outdoor housing IP 95 rating (üSE)
surface mounting, cable bushing PG16
L?nge / Breite / H?he
125 x 80 x 57 mm
Outdoor housing IP 95 rating (üSK)
surface mounting, cable bushing PG16
L?nge / Breite / H?he
175 x 80 x 57 mm
FE - panel mount case
for switchboard front mounting
width / height / depth
96 x 48 x 136 mm
GV -
for DIN rail mounting und
with pluggable terminal clamps
GVB 13x110x128 mm (BxHxT)
GVC 18x110x128 mm (BxHxT)
GVD 23x110x128 mm (BxHxT)
GVE 28x110x128 mm (BxHxT)
GVF 33x110x128 mm (BxHxT)
switchboard housing
LM12 - panel mount case
for switchboard front mounting
width / height / depth
72 x 144 x 71,5 mm
LM6 - panel mount case
for switchboard front mounting
width / height / depth
72 x 72 x 71,5 mm
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Impressum / Company Info
Postanschrift / ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Strasse 13
74374 Zaberfeld
- GERMANY -
Telefon / phone +49 (0) 7046 / 8 75
Telefax / fax +49 (0) 7046 / 76 78
Email / mail
Internet / internet
Registergericht / registration office Amtsgericht Stuttgart
Handelsregisternummer / registration-no. HRB-320159
Bankverbindung / bank details Volksbank Brackenheim-Güglingen
BLZ/bank code: 620 914 00
Konto Nr./account no: 4 052 005
IBAN: DE09 6209 1400 0004 0520 05
BIC: GENODES1VBR
Umsatzsteuer Identnummer / VAT-no. DE145763836
Gesch?ftsführer / manager Hartmut Adamczewski,
Harry Biehler
ISO Zertifizierung / ISO certification ISO 9001:2000 zertifiziert seit 11.07.2003
(certificated since 11.07.2003)
postal address
vertrieb@ad-messtechnik.de
www.adamczewski.com
ADAMCZEWSKI
E l e k t r o n i s c h e M e s s t e c h n i k G m b H
DIRECTORY COMPANY/INFO
Isolation Amplifier AD-TV 24 GL
Descrtption
The separation amplifier AD-TV 24 GL serves the galvanic
separation and amplification of DC-current signals (0/4-20 mA).
The output signal follows linear the input dimension and is
independent of the connected burden up to a limiting value.
Input, output and supply voltage are galvanically separate from
each other with high insulation. An integral electronic power pack
with a high degree of effectiveness prevents strong heating and
allows high output loads. A high packing density is achieved in
combination with a narrow type of construction.
Application
Specifications
Burden amplification and galvanic decoupling of active DC-current
signals in a cost-effective build-up.
construction type: 1-channel switchboard housing
power supply: 20-30 VDC
internal galvanical separate
power consumption: approx. 0,8 W
input: 0...20 mA or 4...20 mA
input voltage drop 50 Ohm
output: 0...20 mA or 4...20 mA
input/output 1:1
with the front sided trimmer in a
range of 5% adjustable
output load: max. 500 Ohm
linearity: < 0,2%
effect of temperature: 100 ppm/°K
insulation test voltage: input/output 3,75 kV RMS
signal/power supply 4 kV RMS
protective systems: input/output against over voltage,
polarity reversal and over current
power supply: against over voltage,
over current and overheating
CE-conformity EN 50081-2, EN 50082-2
ambient temperature 0 to 50°C
Printed 04/2008. We reserve the right for technical changes
(7) (8)
(5)
(2) (6)
(1)
power supply
20 - 30 VDC
input
Input: 0-20 mA or 4-20 mA
Output: 1:1 to input signal
output
Connections and dimensions: AD-TV 24 GL weight: ca. 140 g
protection: IP 20
manner of fastening:
DIN rail: NS35/7,5
connection data:
fine-wire: 2,5 mm2
single-wire: 4,0 mm2
max. voltage: 250 V~
103
78
39
Front
on
AD-TV 24 GL
ADAMCZEWSKI
span.
5 6
7 8
18
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier AD-TV 22 GL
Descrtption
The separation amplifier AD-TV 22 GL serves the galvanic
separation and amplification of DC-current signals (0/4-20 mA).
The output signal follows linear the input dimension and is
independent of the connected burden up to a limiting value.
Input, output and supply voltage are galvanically separate from
each other with high insulation. An integral electronic power pack
with a high degree of effectiveness prevents strong heating and
allows high output loads. A high packing density is achieved in
combination with a narrow type of construction.
Application
Burden amplification and galvanic decoupling of active DC-current
signals in a cost-effective build-up.
Specifications
construction type: 1-channel switchboard housing
power supply: ALLPOWER 20-253V AC/DC
internal galvanical separate
power consumption: approx. 2 VA resp. 0,8 W
input: 0...20 mA or 4...20 mA
input voltage drop 50 Ohm
output: 0...20 mA or 4...20 mA
input/output 1:1
with the front sided trimmer
in a range of 5% adjustable
output load: max. 400 Ohm
linearity: < 0,2%
effect of temperature: 100 ppm/°K
insulation test voltage: input/output 3,75 kV RMS
signal/power supply 4 kV RMS
protective systems: input/output against over voltage,
polarity reversal and over current
power supply: against over voltage,
over current and over temperature
CE-conformity EN 50081-2, EN 50082-2
ambient temperature 0 to 50°C
Printed 08/2008. We reserve the right for technical changes
(7) (8)
(5)
(2) (6)
(1)
power supply
AllPower 20-253V AC/DC
input
Input: 0-20 mA or 4-20 mA
Output: 1:1 to input signal
output
Connections and dimensions: AD-TV 22 GL weight max. 140 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5
connection data:
fine-wire: 2,5 mm2
single-wire: 4 mm2
max. voltage: 250 V~
(~ ( (~ (
103
78
39
Front
on
AD-TV 22 GL
ADAMCZEWSKI
5 6
7 8
18
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier AD-TV 30 GL
Descrtption
The VARIO separation amplifier AD-TV 30 GL serves to galvanically
separate, convert and amplify DC current signals and voltage
signals (0/4...20 mA and 0/2...10V DC). The signal sizes are
adjustable at the front. The output signal follows the input size
linear and is independent of the connected load up to a limiting
value.
Input , output and the supply voltage are galvanically separated
from each other with a high degree of insulation. A highly efficient,
integrated electronic wide-range power pack (ALLPOWER)
enables operation with 24-230 V AC or DC. There is no possibility of
cross polarity of the connection voltage. A high packing density is
achieved due to its narrow build.
Application
Conversion, load amplification an galvanic decoupling of impressed
DC current signals and voltage signals.
Specification
Construction type: 1-channel switchboard housing
Power supply: ALLPOWER 20-253V AC or DC
internal galvanical separated
Power consumption: approx. 2,3 VA resp. 1,5W
Input: 0...20 mA to 4...20 mA or
0...10 V to 2...10 V
Input impedance current: approx. 85 Ohm
voltage: >100 kOhm
Output: 0...20 mA to 4...20 mA or
0...10 V to 2...10 V
Output load: current: >500 Ohm
voltage: <10 kOhm
Linearity: < 0,2%
Effect of temperature: < 100 ppm/K
insulation test voltage: input/output 4 kV RMS
signal/power supply 4 kV RMS AC
4 kV RMS DC
Protective systems: input/output against over-voltage,
confusing the poles, over-current
power rack: against over-voltage,
over-current, over-temperature
CE-conformity: EN 50081-2, EN 50082-2
Ambient temperature: 0...50°C
Printed 01/2008. We reserve the right for technical changes
1
2
0/4-20 mA
4 kV
4 kV
4 kV
power supply
Input I Output
5
6
0/4-20 mA
2
1
0/2-10 V Input U
3
4
ATTENTION:
Bridge for
voltage output!
0/2-10 V
front view
Connections and dimensions: AD-TV 30 GL
Connection data:
fine-wire 2,5 mm2
single-wire 4,0 mm2
max. voltage 250 V AC
Manner of fastening:
attachment rail NS 35 / 7,5
protection: IP 20
weight: ca. 140 g
Input: 0/4-20 mA or 0/2-10 V DC
Output: 0/4-20 mA or 0/2-10 V DC
7 8
+ -
20-253V AC/DC
ADAMCZEWSKI
on
span.
zero
5 6
7 8
18
103
78
39
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier “Vario” AD-TV 33 GL
Descrtption
The vario-separation amplifier AD-TV 33 GL serves the galvanic
separation and amplification of standard DC analogue signals.
The standard signals 0-20 mA, 4-20 mA and 0-10 V are freely
selectable at the front via switches at the input as well as at the
output. All measuring ranges are permanent calibrated, however,
they can still be adjusted via potentiometer at the front, which can
be switched on. The selected output signal follows linear the input
magnitude and is independent from the connected load up to a
limiting value.
Input, output and the supply voltage are galvanically separated
from each other with a high insulation. An integral electronic wide
range power pack with high efficiency prevents strong increases in
temperature and allows high output loads. A high pack density is
achieved in combination with the narrow type of construction. The
universality saves storage costs, a diversity of types is therefore
eliminated.
Application
For load amplification, galvanic decoupling and conversion of
impressed standard signal measuring magnitudes.
Specification
- all standard signals at input and output are freely selectable
- switchable zero point trimmer and final value trimmer
- high output load
- 18 mm narrow housing
Specification
construction 1-channel switchboard housing
power-supply wide-range power supply
20-253 VDC / 30-253 VAC (50-60Hz)
power-consumption approx. 2,8 VA resp.1,5 W
input 0-20mA; 4-20mA or 0-10V
freely selectable on the front panel
input impedance 50 Ohm (current)
200 kOhm (voltage)
output 0-20 mA; 4-20mA or 0-10V
freely selectable on the front panel
output load max. 500 Ohm (current)
min. 500 Ohm (voltage)
linearity error < 0,2%
effect of temperature < 100 ppm/K
insulation test voltage input/output: 3,75 kV RMS
signal/power-supply: 4 kV RMS
protective systems input/output: against over-voltage,
, over-current
power-rack: against over-voltage,
over-current, over-temperature
CE-conformity EN 50081-2, EN 50082-2
ambient-temperature 0-50°C
polarity reversal
Printed 04/2008. We reserve the right for technical changes
ADAMCZEWSKI
on
AD-TV 33 GL
N
V
S1
S7
S6
S5
S2
S3
S4
S0
1 0
103
78
39
5 6
7 8
18
(1)
(2)
(5)
(6)
(7) (8)
+ (~) - (~)
power supply
+
-
input
+
-
output
Connections and dimensions: AD-TV 33 GL weight max. 200 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5
connection data:
fine-wire: 2,5 mm2
single-wire: 4 mm2
max. voltage: 250 V~
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
CONFIGURATION
INPUT S0 S1 S2 S3 S4 S5 S6 S7 OUTPUT
0-20 mA
0-20 mA
0-20 mA
4-20 mA
4-20 mA
4-20 mA
0-10 V
0-10 V
0-10 V
1
1
1
1
1
1
0
0
0
N
N
N
N
N
N
N
N
N
0
0
0
1
0
1
0
0
0
N
N
N
N
N
N
N
N
N
0
1
0
0
0
0
0
1
0
1
1
0
1
1
0
1
1
0
0
0
1
0
0
1
0
0
1
V
V
V
V
V
V
V
V
V
0-20 mA
4-20 mA
0-10 V
0-20 mA
4-20 mA
0-10 V
0-20 mA
4-20 mA
0-10 V
V = 0 = full-scale-trimmer ON
V = 1 = full-scale-trimmer OFF
N = 0 = zero-point-trimmer OFF
N = 1 = zero-point-trimmer ON
Input and output settings:
DIP switch function:
S0: input (current or voltage)
S1: zero-point-trimmer enabling
S2: input signal 4...20 mA
S3: output signal 4...20 mA
S4: zero-point-trimmer enabling
S5: full-scale-trimmer enabling
S6: output signal (current)
S7: output signal (voltage)
Enabling the trimmer allows to modify the calibrated values.
Placing back the trimmer, reset the signals to the default.
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier
with nominal value selector AD-TV 32 GL
Descrtption
The VARIO-separation amplifier AD-TV 32 GL serves the galvanic
separation, conversion and amplification of DC current and voltage
signals (0/4-20 mA and 0/2-10 V DC). The signal dimensions are
adjustable at the front. The starting and end values can here be
adjusted independent of each other.
Input, output and the supply voltage are separate from each other
with high insulation. An integral electronic wide range power pack
(ALLPOWER) with a high degree of effectiveness allows operation
in a supply range of 20-253 V AC or DC.
Additionally, a nominal value can be specified via switch at the front
at the output. The input measuring signal is decoupled and without
influence during this. The nominal value at the output, which can be
activated and adjusted via a potentiometer at the front.
Application
Specification
construction 1-channel switchboard housing
power-supply ALLPOWER 20-253 V AC/DC
power-consumption approx. 2,3 VA resp.1,0 W
input 0-20mA; 4-20mA or 0-10V up to 2-10V
input impedance approx. 85 Ohm (current)
approx. 100 kOhm (voltage)
output 0-20 mA; 4-20mA or 0-10V up to 2-10V
output load <500 Ohm (current)
>10 kOhm (voltage)
nominal value selector over front sided potentiometer 0-100%
linearity error < 0,2%
effect of temperature < 0,03% / K
insulation test voltage input/output: 3,75 kV RMS
signal/power-supply: 4 kV RMS
protective systems
Conversion, burden amplification and galvanic decoupling of active
DC-current and voltage signals with additional manual / automatic
operation via a nominal value specification, which can be activated.
internal galvanical separate
input/output against over voltage,
polarity reversal and over current
power supply: against over voltage,
over current and over heating
CE-conformity EN 50081-2, EN 50082-2
ambient temperature 0 to 50°C
Printed 01/2008. We reserve the right for technical changes
Connection and dimension: AD-TV 32 GL
front view
input: 0/4-20 mA or 0/2-10 V DC
output: 0/4-20 mA or 0/2-10 V DC
1
2
0/4-20 mA
7 8 4 kV
4 kV
4 kV
ALLPOWER
power-supply
input I output
5
6
0/4-20 mA
2
1
20 - 253V AC/DC
input U
3
4
0/2-10 V
0/2-10 V
connection data:
fine wire 2,5 mm2
single wire 4,0 mm2
max. voltage 250 V AC
manner of fastening:
attachment rail NS 35/7,5
protection: IP 20
weight: ca. 140 g
ATTENTION:
Bridge for
voltage output!
ADAMCZEWSKI
on
AD - TV 32 GL
zero point
full scale
0
20 40
80
100
%
set point
simulation
on
off
5 6
7 8
18
103
78
39
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Set Value Buffer Amplifier
with remote activation, check back contact
and transmitter supply
AD-TV 320 GS
Descrtption
Characteristics
Application
The set value buffer amplifier AD-TV 320 GS serves the galvanic
separation, transformation and amplification of DC current and
voltage signals (0/4-20mA or 0/2-10V).The device has additionally
a transmitter supply and a set value function, which can be
switched on.
The activation of the set value function is carried out selectable with
a brief depression of the key at the front or with a control signal (24V
active or contact) at the remote control input. Any output set value is
set with the potentiometer at the front. Activation of zero trimmers
and full trimmers is possible with longer depression of the set value
key. With this, the signal magnitudes are adjustable in the range of
±25%. An integral electronic wide range power pack allows
operation in a wide supply area. Characteristics
- Restoration of the last device condition on supply connection
(i.e. after power cut).
- Setting of a set value is carried out undamped and independent
of the trimmer positions
between 0...100% of the specified output range.
- Check back contact in set value condition (closer).
- The output signal remains even with missing input signal at the
output start (i.e. 4 mA).
Optionally available functions
- Increased signal damping (max. approx. 300s) possible at the
works
- Inverse function possible (i.e. 0...20mA in 20...0mA).
- Optional linearization curve
Transformation, burden amplification and galvanic disconnection
of impressed transmitter signals, current signals and voltage
signals with additional simulation function via set value
specification, which can be activated.
Specification
construction 1-channel switchboard housing
power-supply wide range 20-253 VDC/50-253 VAC
power-consumption max. 3,5VA resp. 2,2W
input 0/4-20 mA, 0/2-10V
(to be specified with purchase order)
input impedance approx. 50 Ohm (20mA)/90 kOhm (10V)
transmitter supply current-limited 19V/25mA
(no-load voltage approx. 26V)
output 0/4-20 mA, 0/2-10V
(to be specified with purchase order)
output load <500 Ohm (20mA)
>500 Ohm (10V
damping (filter) as factory setting max. approx. 0,3%/s
(linear, max. approx. 300s)
remote input (edge triggered) 10-30V,
for contact use the transmitter-supply
remote pulse width 20...1.000ms
settling/fall time (10-90%) approx. 50ms
zero/span trimmer +/- 25%
linearization curve 24 plot-points (X/Y-chart at EEPROM)
green LED function operating indicator, flashes when
input signal overflow
red LED function simulation display, flashes every 5 sec.
by activated zero/span trimmer
nominal value selector over front sided potentiometer 0-100%
linearity error < 0,2%
effect of temperature < 0,03% / K
insulation test voltage input/output: 3,75 kV RMS
signal/power-supply: 4 kV RMS
protective systems input/output against over voltage,
polarity reversal and over current
power supply: against over voltage,
over current and over heating
CE-conformity EN 50081-2, EN 50082-2
ambient temperature 0 to 50°C
Printed 01/2008. We reserve the right for technical changes
ADAMCZEWSKI
ZERO
SPAN
SimOn
set-value selector
0
20 40
80
100
simulation
on/off
7 8
10 11
23
9
12
103
78
39
Connections and dimensions: AD-TV 320 GS weight max. 200 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5
connection data:
fine-wire: 2,5 mm2
single-wire: 4 mm2
max. voltage: 250 V~
remote
input
simulation
signalling contact
~~=
power-supply
0-10 V
0-20 mA
ground
+3
11 12
20-253 VDC
50-253 VAC (50-60Hz)
supply +18V
0-20 mA
ground
+4
1
Input U
Input I
3,75 kV
4 kV
4 kV
+1
2
2 +8
9
Output
0/4-20 mA or
0/2-10 V
by customer
order
5 +6 7 10 Transmitter
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier AD-TV 300 GS
Descrtption
The isolation amplifier AD-TV 300 GS can transform and amplify
each of the three in general employed industry-signals (0-20 mA, 4-
20 mA, 0-10 V). Thereby are all combinations possible. A changeover
is not necessary. The output current is unaffected by the
connected load up to the maximum resistance.
Application
Amplification and matching of standard-industry-signals with
uncomplicated transforming to independently selectable outputsignal.
Specialities
- each norm- signal freely selectable for input and output
- separation and amplification galvanically
- no mechanical multiple-way switch
- no addition scaling necessary
Technical Data
Power supply: allpower 20-253 VDC and AC
internal galvanical separated
Power consumption: approx. 4 VA or 2 W
Input: 0-20 mA, 4-20 mA, 0-10 V
freely selectable over clamp
Input-resistance: current:<50 Ohm,
voltage:>750 kOhm
Output: 0-20 mA, 4-20 mA, 0-10 V
freely selectable over clamp
Output-load: current: max. 500 Ohm
voltage: min. 1 kOhm
Reaction time: input/output 10-90%, approx. 50ms
Precision: better 0,5%
Effect of temperature: < 50 ppm/°K
Test voltage: signal: 1,5 kV RMS
signal/supply: 4 kV RMS
Ambient temperature: 0 to 50 C
Protective system: signal lines against transient over-voltage
Power-pack against over-current,
over-voltage and over-temperature.
Printed 04/2008. We reserve the right for technical changes 103
78
39
7 8
10 11
23
9
12
ADAMCZEWSKI
front view
on
AD-TV 300 GS
+
-
+
+
-
0-10 V
0-20 mA
4-20 mA
(5)
(6)
(7)
(8)
(9)
(11) (12)
power supply
Allpower 20-253V AC/DC
4-20 mA
0-20 mA
0-10 V
ground
(1)
(2)
(3)
(4)
input output
Connections and dimensions: AD-TV 300 GS weight max. 200 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5
connection data:
fine-wire: 2,5 mm2
single-wire: 4 mm2
max. voltage: 250 V~
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier AD-TV 310 GS
AD-TV 310 GB
Descrtption
Application
Specification
The universal-amplifier AD-TV 310 converts voltage or current into
a proportional output-current or output-voltage. The output signal
is here up to the max. resistor independent from the connected
load. Input, output, and power supply are isolated galvanically.
High-grade transducer for the industry.
Amplification and matching of current- or voltage signals. Avoiding
of noise voltage and noise current delay. Converting of analogue
signals into systems with different grounding.
Adjustable signal dumping, current and voltage-limitation, bent
characteristic, adjustable zero and adjustable amplifying, others
on request.
Specification
against over-voltage and
against polarity reversal
EMC-compatible EN 50081-2, EN 50082-2,
CE conformity
)
Input: Current or voltage
(e.g. 0-20 mA, 4-20 mA, 0-10 V)
Input limit value 0-50 mV to 0-500 V DC
0-100 μA to 0-200 mA
Input resistance: 50 Ohm at 20 mA or 10 kOhm/V
Input-protection:
Output: Current or voltage, impressed(*)
Output-value: 0-100 μA to 0-20 mA, 0-10 mV to 0-20 V
max. load: GB/EV: 1 kOhm/20mA, 500 Ohm/10V
GS: 800 Ohm/20mA, 500 Ohm/10V
Ripple frequency: < 0,5% at 1 kOhm load
Linearity: < 0,3 %
Reaction time: approx. 20 ms
Effect of temperature: approx. 50 ppm/°K
Ambient temperature: 0 to +50°C
Power supply: GB/EV: 230 VAC or 20-30 VDC
GS: ALLPOWER 20-253V AC/DC
Protective system power-pack: against over voltage,
over temperature and over load
Insulation-voltage: input/output 1 kV
Power supply 2 kV/DC resp. 4 kV/AC
power consumption: approx. 3,5 VA or. 3 W
(*) values must be advised by order
Printed 04/2008. We reserve the right for technical changes
weight max. 200 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5
connection data:
fine-wire: 2,5 mm2
single-wire: 4 mm2
max. voltage: 250 V~
Connections
AD-TV 310 GB
Connections AD-TV 310 GS
103
78
39
7 8
10 11
23
9
12
ADAMCZEWSKI
front view
1
2
12
11
7
8
+ + +~ ~
input output power supply
1
8
7
6
5
4
3
2
9
160
100
80
4,2
21
1
2
3
4
5
6
7
8
9
+
~
~
+
+
power-supply
input signal
output signal
frame ground
95x100x63mm
protection: IP 30
weight: ca. 400g
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier
(2-channel)
AD-TV 412 GS
Descrtption
Application
The 2-channel isolation amplifier of the series AD-TV 412 is
being used for the galvanical isolation and amplification of
impressed currents of 0-20 mA or 4-20 mA. The output
current is unaffected from the connected load. Input,
output and supply current are separated galvanically.
All channels are isolated from each other galvanically.
Amplification of current signals. Economical active
galvanical isolation.
Specifications
Power supply: broad-range power supply
20-253 VDC and
50-253 VAC (50-60Hz)
Construction type: switchboard housing (23x78x98
mm)
Power consumption: approx. 5 VA or 4 W
Input: 0-20 mA or 4-20 mA
Input voltage drop: approx. 0,8 V
Output: = Input 1:1
Output load: max. 500 Ohm
Load influence: < 0,02% / 100 Ohm
Exactness: better 0,2%
Temperature influence: < 15 ppm / K
max. usable frequency: 500 Hz at 500 Ohm load
Reaction time: approx. 0,2 ms
Input/output 10-90 %
Insulation voltage: Input/output >500 V RMS
Signal/supply > 2 kV RMS
Protective system: Input: against over voltage,
confusing the poles
power pack: against over current,
over voltage, over temperature
Ambient temperature: -0 to + 50 C
Printed 08/2006. We reserve the right for technical changes
4
1 3
5 6
2
10 12
7 8
11
9
input 2
+
+
power-supply
input 1
output 1
output 2
+
+
Connections and dimensions: AD-TV 412 GS weight 160 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5; NS 32
connection data:
fine-wire: 2,5 mm2
single-wire: 4 mm2
max. voltage: 250 V~
103
78
39
7 8
10 11
23
9
12
ADAMCZEWSKI
front view
AD-TV 300 GS
on
~~
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier AD-TV 2 GX
Descrtption
Application
The isolation amplifier AD-TV 2 GX, with a construction width of
only 6.2 mm, serves the galvanic separation of DC current signals.
The output signal follows linear the input variable and is, up to a
limiting value, independent of the connected burden (0/4-20 mA,
1:1 input/output). Due to the narrow design, a high packing density
is achieved. In combination with a DIN rail connector, the wiring is
considerably reduced.
Burden amplification and galvanic disconnection of impressed
DC current signals.
Specification
construction 1-channel switchboard housing
6,2 x 92 x 101 mm (WxHxD)
power-supply 18-30 VDC
power-consumption max. 850 mW (dependent upon signal)
input 0-20mA or 4-20mA
input impedance 50 Ohm
output 0-20 mA or 4-20mA
1:1 to the input signal
output load max. 400 Ohm with 20 mA
open-circuit voltage max. 13V with current output
accuracy 0,1% of full scale
linearity error max. 0,1% of full scale
response time <50 ms (10-90%)
ripple <0,1%
ambient-temperature 0-50°C
effect of temperature <70 ppm/K
insulation test voltage 1,5kV, 50Hz
(1 min. all isolating distances)
protective systems against pulsed over-voltage,
over-current and p
E-conformity DIN EN 50081-2; DIN EN 50082-2;
DIN EN 55011(Cl.A industrial sector)
DIN EN 61000-4-2; DIN EN 61000-4-3
DIN EN 61000-4-4; DIN EN 61000-4-6
VDE 0843-5
connection technology adapted for
olarity reversal
C
DIN rail connector for
bridging the power-supply
Printed 09/2008. We reserve the right for technical changes
92
front
TV
2
101
46
5
6
7
8
top
1
2
3
4
6,2
down
18-30 VDC
7 8
+ 5
6
_
power-supply input output
1+
2
_
3 4
(independent of polarity)
0/4..20 mA 0/4..20 mA
Connections and dimensions: AD-TV 2 GX weight max. 70 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5
connection data:
fine-wire: 2,5 mm2
single-wire: 4 mm2
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier AD-TV 3 GX
Descrtption
Application
The VARIO isolation amplifier AD-TV 3 GX, with a construction
width of only 6.2 mm, serves the galvanic separation, conversion
and amplification of DC current signals and voltage signals (0/4-20
mA and 0/2-10 V). The signal magnitudes can be selected with DIP
switches. For range changing, manual adjustment is required, the
initial values and final values can be adjusted via a trimmer. The
output signal follows linear the input variable and is, up to a limiting
value, independent of the connected burden. Due to the narrow
design, a high packing density is achieved. In combination with a
DIN rail connector for bridging the supply voltage, the wiring is
considerably reduced.
Conversion, burden amplification and galvanic disconnection of
impressed DC current signals and voltage signals.
Specification
construction 1-channel switchboard housing
6,2 x 92 x 101 mm (WxHxD)
power-supply 18-30 VDC
power-consumption max. 850 mW (dependent upon signal)
input 0/4-20 mA, 0-10 V or 0-5 V
over DIP switch selectable
input impedance 50 Ohm with 20 mA input
50 kOhm with 5 V input
100 kOhm with 10 V input
trimmer to trim the zero and scale-span
output 0/4-20 mA or 0-10 V
over DIP switch and trimmer adjustable
output load max. 500 Ohm with 20 mA
or min. 500 Ohm with 10 V
open-circuit voltage max. 13V with current output
short-circuit current max. 28 mA with voltage output
accuracy 0,1% of full scale
linearity error max. 0,1% of full scale
response time <50 ms (10-90%)
ripple <0,1%
ambient-temperature 0-50°C
effect of temperature <70 ppm/K
insulation test voltage 1,5kV, 50Hz
(1 min. all isolating distances)
protective systems against pulsed over-voltage,
over-current and p
E-conformity DIN EN 50081-2; DIN EN 50082-2;
DIN EN 55011(Cl.A industrial sector)
DIN EN 61000-4-2; DIN EN 61000-4-3
DIN EN 61000-4-4; DIN EN 61000-4-6
VDE 0843-5
olarity reversal
C
Printed 09/2008. We reserve the right for technical changes
Connections and dimensions: AD-TV 3 GX weight max. 70 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5
connection data:
fine-wire: 2,5 mm2
single-wire: 4 mm2
front
TV
3
V
N
101
92
46
A
output switch
E
input switch
5
6
7
8
top
1
2
3
4
6,2
down
ON
1 2
ON
1 2
A1 A2
E1 E2
ON
1 2
0/4..20 mA
ON
1 2
0..10 V
output switch
ON
1 2
0/4..20 mA
ON
1 2
0..10 V
ON
1 2
0..5 V
input switch
18-30 VDC
7 8
+5
6
_
power-supply input output
1+
2
_
3 4
(independent of polarity)
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier AD-TV 1 GX
Descrtption
Application
The isolation amplifier AD-TV 1 GX, with a construction width of
only 6.2 mm, serves the galvanic separation of DC voltage signals.
The output signal follows linear the input variable and is, up to a
limiting value, independent of the connected burden (0-10 VDC,
1:1 input/output). Due to the narrow design, a high packing density
is achieved. In combination with a DIN rail connector, the wiring is
considerably reduced.
Burden amplification and galvanic disconnection of impressed
DC voltage signals.
Specification
construction 1-channel switchboard housing
6,2 x 92 x 101 mm (WxHxD)
power-supply 18-30 VDC
power-consumption max. 850 mW (dependent upon signal)
input 0-10 VDC
input impedance 100 kOhm
output 0-10 VDC
1:1 to the input signal
output load min. 500 Ohm with10VDC
accuracy 0,1% of full scale
linearity error max. 0,1% of full scale
response time <50 ms (10-90%)
ripple <0,1%
ambient-temperature 0-50°C
effect of temperature <70 ppm/K
insulation test voltage 1,5kV, 50Hz
(1 min. all isolating distances)
protective systems against pulsed over-voltage,
over-current and p
E-conformity DIN EN 50081-2; DIN EN 50082-2;
DIN EN 55011(Cl.A industrial sector)
DIN EN 61000-4-2; DIN EN 61000-4-3
DIN EN 61000-4-4; DIN EN 61000-4-6
VDE 0843-5
connection technology adapted for
olarity reversal
C
DIN rail connector for
bridging the power-supply
Printed 09/2008. We reserve the right for technical changes
92
front
TV
1
101
46
5
6
7
8
top
1
2
3
4
6,2
down
18-30 VDC
7 8
+ 5
6
_
power-supply input output
1+
2
_
3 4
(polarity neutral)
0...10 VDC 0...10 VDC
Connections and dimensions: AD-TV 1 GX weight max. 70 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5
connection data:
fine-wire: 2,5 mm2
single-wire: 4 mm2
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier AD-TV 40 GVC
Printed 03/2011. We reserve the right for technical changes
Application
The Vario separation amplifier AD-TV 40 GVC serves the galvanic
separation and amplification of standard DC analogue signals.
During this, the standard signals 0/4–20 mA and 0/2–10 V are
freely selectable via switches or terminals, at the input as well as
at the output. All measuring ranges are fixed calibrated, however,
they can be adjusted via potentiometer, which can be switched in
at the front, in a range of approx. +/-20%.
Furthermore, this series of devices is equipped with a
configuration interface AD-PC as standard, with which the input
and output measuring signal can be freely programmed with the
optional programming software VarioConfig in a range of max. 20
mA or 10 VDC.
The selected output signal follows the input variable linear and is
independent up to a limiting value from the connected burden.
Input, output and the supply voltage are separated from each
other galvanically with high isolation. An integral electronic widerange
power pack with high-efficiency prevents high heating and
permits high output loads.
Descrtption
input current
measuring range 0-20 mA; 4-20 mA
resolution 10 Bit
input resistance 50 Ohm
input voltage
measuring range 0-10 V; 2-10 V
resolution 10 Bit
input resistance >700 kOhm
output current
output range 0-20 mA; 4-20 mA
resolution 11 Bit
max. burden 400 Ohm
residual ripple <50 μAss
output voltage
output range 0-10 V, 2-10 V
resolution 11 Bit
max. burden 10 kOhm
residual ripple
linearity error < 0,5 % of full scale
trimmer function
trim range approx. +/-20%
configuration interface
AD-PC -> USB
(optional programmable with AD-Studio software)
supply
supply voltage 20-253 VDC or 50-253 VAC
max. power consumption 1,2 W/2,8 VA
housing
dimensions (WxHxD) 18x110x128mm
type of protection IP 20
connection method
manner of fastening DIN rail 35mm (EN 50022)
weight approx. 130 gr.
environmental conditions
ambient temperature 0-50°C
storage und transport -10-+70°C
EMC
product family standard EN 61326
error transmission EN 55011, CISPR11 Kl.B
During checking, slight signal deviations are possible
galvanic separation. test voltages
input/output 2,5 kV RMS (1 min.)
signal/auxiliary voltage 4 kV RMS (1 min.)
protective systems
input/output over voltage and over current
power supply over voltage, over current and
over temperature
input filter (optional programmable with AD-Studio)
filter 10 ms/filter value (0...30.000)
<20 μVss
Accuracy
unit 0,3%
temperature influence < 100 ppm / K
response time approx. 70 ms
detachable terminal clamp
Specific characteristics
!
!
!
!
All standard signals at input and output are freely selectable
Zero point trimmer and final value trimmer can be
switched on
Programming via optional AD-Studio Configuration
software possible
18 mm narrow housing with connection terminals, which
can be pulled off
please turn over --->
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Block and wiring diagram
2
1
3
10
11
7
8
9
10V
20mA
input
50-253 V AC
20-253 V DC
power-supply
20mA
10V
output GND
110
18
TV40GVC
ADAMCZEWSKI
zero
span
On
AD-PC
Functional DIP-switch Terminology
trimmer off:
= signals compare to DIP-switch 1+2,
trimmer on frontpanel inactive
trimmer on
= trimmer on frontpanel active for
zero (offset) and span
trim range: +/-20%
DIP = input and output signals compare
to switch 1, 2 and 3
PC = configuration port active for
programming software AD-Studio
DIP-switch 1-3 inactive
input
0-20mA/0-10V
input
4-20mA/2-10V 1
output
0-20mA/0-10V
output
4-20mA/2-10V 2
trimmer on 3 trimmer off
PC 4 DIP
trimmer
zero
span
Isolation Amplifier AD-TV 40 GVC
Dimensions
Terminal location
upper terminal location
lower terminal location
2 31
A
7 8 9 10 11 12
B C
91
128
A
B C
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
please turn over --->
Descrtption
Application
The buffer amplifier AD-TV 22 GVB serves the galvanic
separation and amplification of DC current signals (0/4–20
mA). The output signal follows the input variable linear and
is independent of the connected burden up to a limiting
value.
Input, output and the supply voltage are galvanically separated
from each other with high insulation. An integral electronic,
high-efficiency power pack prevents high temperature
rises and permits high output loads.
A high packing density and high working ergonomics are
achieved in combination with pull-out connecting terminals
and a construction width of 13 mm.
Burden amplification and galvanic decoupling of impressed
DC current signals.
Technical data
1,2 W / 2,8 VA
input current
measuring range 0-20 mA; 4-20 mA
input resistance 50 Ohm
output current
output range 0-20 mA; 4-20 mA
max. burden 400 Ohm
residual ripple <25 μAss
accuracy
unit < 0,2%
linearity error < 0,2%
temperature influence < 100 ppm / K
response time < 1 ms
supply
supply voltage 20-253 VDC or 50-253 VAC
max. power consumption
housing
dimensions (WxHxD) 13x110x128mm
type of protection IP 20
connection method
manner of fastening DIN rail 35mm (EN 50022)
weight approx. 98 gr.
environmental conditions
ambient temperature 0-50°C
storage und transport -10-+70°C
EMC
product family standard EN 61326
error transmission EN 55011, CISPR11 Kl.B
During checking, slight signal deviations are possible
galvanic separation. test voltages
input/output 3,75 kV RMS (1 min.)
signal/auxiliary voltage 4 kV RMS (1 min.)
protective systems
input/output over voltage and over current
power supply over voltage, over current and
over temperature
detachable terminal clamp
Specific characteristics
!
!
Supply buffer amplifier for 3-way separation of
0/4-20 mA signals (output follows input 1:1)
13 mm narrow housing with pull-off connecting
terminals
Printed 03/2010. We reserve the right for technical changes
Isolation Amplifier AD-TV 22 GVB
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Block and wiring diagram
Dimensions
2
7
8
1
20mA
input
50-253 V AC
20-253 V DC
power-supply
5
6 GND
20mA output 110
91
128 13
TV22
On
B
A
C
Terminal location
lower terminal location
21
A
B C
65 87
upper terminal location
Printed 03/2010. We reserve the right for technical changes
Isolation Amplifier AD-TV 22 GVB
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
please turn over --->
Descrtption
Application
The separation amplifier AD-TV 24 GVB serves the galvanic
separation and amplification of DC-signals (0/4–20
mA). The output signal follows the input magnitude linear
and is independent of the connected burden up to a limiting
value.
Input, output and the supply voltage are separated galvanically
from each other with high insulation. An integral,
electronic power pack is designed with a voltage range of
11 to 30 VDC, also for 12V battery voltage.
With the combination of connection terminals, which can
be pulled off, and a construction width of 13 mm, a high
packing density and high working ergonomics are
achieved.
Burden amplification and galvanic decoupling of impressed
DC current signals.
Specification
Input current
measuring range 0-20 mA; 4-20 mA
input resistance 50 Ohm
Output current
output range 0-20 mA; 4-20 mA
(1:1 to input)
max. burden 300 Ohm
residual ripple <25 μAss
Accuracy
unit < 0,2%
linearity error < 0,2%
temperature influence < 100 ppm / K
response time < 1 ms
Supply
supply voltage 11-30 VDC
power consumption max. 0,7 W
Housing
dimension (WxHxD) 13x110x128mm
type of protection IP 20
connection method detachable terminal clamp
connectors clamping torque
0,5 Nm (EN 60999)
manner of fastening DIN rail 35 mm (EN 50022)
weight approx. 80 gr.
Environmental conditions
ambient temperature 0...+50°C
storage and transport -10...+70°C
EMC
product family standard EN 61326
error transmission EN 55011, CISPR11 Kl.B
During checking ,slight signal deviations are possible
Galvanic separation, test voltages
input/output 3,75 kV RMS (1 min.)
signal/power-supply 4 kV RMS (1 min.)
Protective systems
input/output over voltage and over current
power-supply over voltage, over temperature
reverse voltage protection
Specific characteristics
! Separation amplifier for a 3-way separation of
0/4-20 mA signals (output follows input 1:1)
! 13 mm narrow housing with connection
terminals, which can be pulled off
! Suitable for battery voltage of 12VDC
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13
Tel. +49 (0)7046-875
vertrieb@ad-messtechnik.de
Fax +49 (0)7046-7678
www.adamczewski.com
74374 Zaberfeld
Separation Amplifier AD-TV 24 GVB
Printed 09/2011. We reserve the right for technical changes
Terminal location
upper terminal location
21
A
lower terminal location
B C
65 87
Block and wiring diagram
2
7
8
1
20mA
input
11-30 VDC
power-supply
5
6 GND
20mA output
Dimension
110
91
128 13
TV24
On
B
A
C
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13
Tel. +49 (0)7046-875
vertrieb@ad-messtechnik.de
Fax +49 (0)7046-7678
www.adamczewski.com
74374 Zaberfeld
Separation Amplifier AD-TV 24 GVB
Printed 09/2011. We reserve the right for technical changes
Descrtption
Application
The multiplier separation amplifier AD-TV 452 GVC serves the
galvanic separation, amplification and conversion or adaption of
analogue measuring signals with simultaneous multiplication of
the input signal. The compact housing contains 2 fully independent
output channels. All output channels are galvanically separated
from each other, from the input and from the supply voltage. The
types of signal can be freely selected at the input as well as at the
individual output channels. Spindle trimmer (zero N1..2 / full V1..2)
are located at the front for direct adaption. The multiplier separation
amplifier is also available in 2-channel version (AD-TV 454 GVC).
Galvanic separation, adaption, amplification and conversion of an
analogue measuring signal and additional multiplication in 4 independent
output channels.
Specification
construction 1-channel switchboard housing
18x110x128mm (WxHxD) with
power supply 20–253 VDC and
50–253 VAC (50–60Hz)
)power consumption max. 1,8 W / 2,8 VA
input: 0–20 mA, 4–20 mA, 0–10 V, 2–10 V
adjustable (others on request)
input impedance 50 Ohm with current
100 kOhm with voltage
output: 0–20 mA, 4–20 mA, 0–10 V, 2–10 V
each channel adjustable
output load max. 400 Ohm with 20 mA
(each channel) min. 10 kOhm with 10 V
linearity error < 0,2 % of end value
effect of temperature < 100 ppm / K
residual ripple < 50 mVSS
insulation test voltage input/output: 2,5 kV RMS (1min)
channel/channel: 2,5 kV RMS (1min)
signal/power supply: 4 kV RMS (1min)
protective systems input/output: against over-voltage,
and over-current
power supply: against over-voltage,
over-current and over-temperature
(*) CE-conformity DIN EN61326; DIN EN55011(class B)
ambient temperature 0 .. 50 °C
(*)
detachable terminal clamp
During checking, slight signal deviations are possible
Printed 05/2009. We reserve the right for technical changes
50-253 V AC
20-253 V DC
7
8
9
10
11
1
2
3
4
5
6
20mA
10V
input
power supply
A1
A2
20mA
10V
GND
20mA
10V
GND
110
91
128 18
TV452GVC
ADAMCZEWSKI
upper terminal
designation
2 31 54 6
7 8 9 10 11 12
lower terminal
designation
N1
V1
N2
V2
On
Connections and dimensions: TV 452 GVC weight: ca. 130 g
protection: IP 20
manner of fastening:
DIN rail: NS35/7,5
connection data:
fine-wire: 2,5 mm2
single-wire: 4,0 mm2
max. voltage: 250 V~
Multiplier Separation Amplifier AD-TV 452 GVC
A B C D
A
C
B
D
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Printed 08/2006. We reserve the right for technical changes
AD-TV 350 GA
Descrtption
The separation amplifier of the type family AD-TV 350 serves the
galvanic separation, conversion and amplification of bi-polar
signal magnitudes. The high frequency range allows DC as well as
AC transmissions. The output stage is designed for currents up to
100 mA.
Input, output and supply voltage are galvanically separated. The
output signal is independent of the connected load up to a
maximum value.
Application
For registration, galvanic 3-way separation, conversion and
amplification of bi-polar measuring magnitudes (voltage or
current)
Technical data
construction type 1-channel switchboard- housing
power-supply 80-250 VAC or 20-30 VDC *
integrated electronic power-rack
others on request
power consumption approx. 4,5 W resp. 10 VA
input current or voltage, also bipolar
max. -20..0..+20 mA
or -10..0..+10 V
input-resistance 50 Ohm resp. 100 kOhm
output current max. -100..0..+100 mA
voltage max. -10..0..+10 V
output load max. 100 Ohm with 100 mA
linearity error < 0,2%
ripple frequency < 20 mVss by Ia = 100 mA
effect of temperature < 50 ppm/K
switch-on drift 0,1%
limiting frequency default: 1 kHz (-3 dB)
optional by max. 20 kHz (-3 dB)
insulation test input/output: 1,5 kV RMS
signal/power-supply: 2 kV RMS (DC)
4 kV RMS (AC)
protection systems input/output: against over-voltage,
confusing the poles, over-current
power-rack: against over-current,
over-voltage and over-temperature
CE-conformity EN 50081-2, EN 50082-2
ambient-temperature 10-50°C
(*) values must be defined by order
Isolation Amplifier bipolar
with high-current output stage
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24 25 28 29 30 26 27
0,5 4
ADAMCZEWSKI
AD-TV 350 GA
High Current Isolation Amplifier
Power-supply
+
Output
Current
+
Output
Voltage
+
Input
Current
+
Input
Voltage
+
119
100 73
Connections and dimensions: AD-TV 350 GA weight 400 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5; NS 32
connection data:
fine-wire: 2,5 mm2
single-wire: 4 mm2
max. voltage: 250 V~
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Printed 08/2006. We reserve the right for technical changes
AD-TV 380 GA
Descrtption
Application
For registration, galvanic 3-way separation, conversion and
amplification of bi-polar measuring magnitudes (voltage or
current)
The isolating amplifier of the type family AD-TV 380 serves the
galvanic isolation, conversion and amplification of analog signal
magnitudes. The output stage is designed for currents up to
200 mA.
Input, output and supply voltage are galvanically isolated from
each other. The output signal is independent from the earthing up
to a maximum value.
Technical data
construction: 1-channel housing typ: GA
power-supply: 24 VDC, +/- 10 %
integrated electronic power-supply
internal galvanically insulated
others on request
power-consumption: approx. max. 6,0 W
input: current or voltage
max. 10V resp. max. 20 mA
input impedance: 50 Ohm / 20 mA resp.
100 kOhm / 10 V
output: current max. 0-200 mA
output load: max. 40 Ohm / 200 mA
max. 80 Ohm / 100 mA
linearity error: < 0,2%
ripple frequency: < 20 mVss by Ia = 100 mA
influence of temperature: < 100 ppm/K
switch on drift: 0,1%
barrier frequency: default: 1 kHz (-3 dB)
optional: max. 20 kHz (-3 dB)
insulation test voltage: input/output: 3,75kV RMS
signal/power-supply: 2 kV RMS
protection: input/output against over-voltage,
polarity reversal, over-current
power supply unit against over-current
over-voltage, and over-temperature
CE-conformity: EN 50081-2, EN 50082-2
ambient temperature: 0...50°C
Isolation Amplifier
with high-current output stage
119
100 73
Connections and dimensions: AD-TV 380 GA weight 400 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5; NS 32
connection data:
fine-wire: 2,5 mm2
single-wire: 4 mm2
max. voltage: 250 V~
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24 25 28 29 30 26 27
0,5 4
ADAMCZEWSKI
AD-TV 380 GA
High Current Isolation Amplifier
Power-supply
20-30 VDC +
Output
+
Input
+
zero span
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier bipolar AD-TV 810 GS
Descrtption
The separation amplifier of type family AD-TV 810 serves the galvanic
separation, conversion and amplification of bipolar signal
sizes. The very high frequency range allows direct current as well as
alternating current transfers. Input, output and the supply voltage
are galvanically separated from each other. The output signal is
dependent on the connected load up to a maximum value. The limit
frequency of the amplifier can be set at the front as an option.
Application
Recording, galvanic 2-way separation, conversion and amplification
of bipolar measuring sizes (voltage or current).
Specification
Construction type: 1 channel switchboard housing
Power supply: ALLPOWER 20-253V AC/DC
internal galvanical seperated
Power consumption: approx. 2,5 VA or 4 W
Input : voltage or current, bipolar
e.g. +/-20 mA or +/-10 V
Input-resistance: current: 50 Ohm / 20mA
voltage: 10kOhm/V
Output : voltage or current, bipolar
Output-load: current: max. 500 Ohm
voltage: min. 1 kOhm
Linearity: < 0,2%
Ripple frequency: < 10 mVss
Effect of temperature: < 100 ppm/K
Cut-off frequency: 20 kHz (-3 db)
Optionally adjustable: 20kHz; 2kHz; 1kHz; 500Hz; 100Hz
Insulation test: input/output 2 kV RMS
signal/power supply: 4 kV RMS
Protective systems: input/output: against over-voltage,
over-current, confusing the poles
power-rack: against over-voltage,
over-current, over-temperature
Ambient temperature: 0 - 50°C
(*) Values must be adviced by order
(*)
(*)
Printed 03/2008. We reserve the right for technical changes
optionally with adjustable cut-off frequency
Connections and dimensions: AD-TV 810 GS weight: ca. 200 g
protection: IP 20
manner of fastening:
DIN rail: NS35/7,5
connection data:
fine-wire: 2,5 mm2
single-wire: 4,0 mm2
max. voltage: 250 V~
103
78
39
7 8
10 11
23
9
12
ADAMCZEWSKI
front view
Voll
AD-TV 581 GS
Null
on
2 kHz
1 kHz
500 Hz
100 Hz
20 kHz
f (-3dB) g
(1)
(2)
(7)
(8)
(11) (12)
+ (~) - (~)
Power-supply
+
-
Input
+
-
Output
(*)
(*) optionally adjustable
cut-off frequency
Input: analog input-signal bipolar
Output: analog output-signal bipolar
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier AD-TV 200 GS
Descrtption:
Application:
The active isolation amplifiers AD-TV 200 GS serve for galvanic
separation, for the amplifying and for converting of analoguestandard
signals 0-20 mA; 4-20mA; 0-10V. The offset and the
amplification can be adapted by means of two frontal placed
potentiometers. Due to the integral electronic powerpack, heating
up is excluded as much as possible, the narrow GS-units can be
fitted without distances. All signal sizes are galvanic isolated from
each other and from the supply voltage (3-way isolation), the
output signal is independent from the output load up to the
maximum value.
Galvanic isolation, amplification and transformation of analogous
signals.
Technical data:
(*) values must be defined by order
construction type: 1 channel switchboard housings
power supply: Allpower 20-253 V AC/DC
internal galvanic separated
power consumption: approx. 2W resp. 2 VA
input: 0-20mA; 4-20mA; 0-10V (*)
input-Resistance: 50 Ohm with current-input
100 kOhm with voltage-input
output: 0-20mA; 4-20mA; 0-10V (*)
output load: max. 500 Ohm with current-input
min. 1 kOhm with voltage-input
linearity error: < 0,2 %′
influence of temperature: < 100 ppm/K
build-up time: ca. 5 ms (0-90%)
ripple frequency: < 50 mVss
insulation test voltage: input/output: 3,75 kV RMS
signal/power supply: 4 kV RMS
protective systems: input/output against over voltage,
polarity reversal and over current
power supply: against over voltage,
over current and over heating
CE-conformity EN 50081-2, EN 50082-2
ambient temperature 0 to 50°C
Printed 04/2008. We reserve the right for technical changes 103
78
39
7 8
10 11
23
9
12
Connections and dimensions: AD-TV 200 GS weight 160 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5
connection data:
fine-wire: 2,5 mm2
single-wire: 4 mm2
max. voltage: 250 V~
(1)
(2)
(7)
(11)
(8)
(12)
+ (~) - (~)
Power-supply
+
-
Input
+
-
Output
Order
specification
output 0-20 mA
output 4-20 mA
output 0-10 V
input
0-20 mA
TV 200 GS-22
TV 200 GS-24
TV 200 GS-21
input
4-20 mA
TV 200 GS-42
TV 200 GS-44
TV 200 GS-41
input
0-10 V
TV 200 GS-12
TV 200 GS-14
TV 200 GS-11
ADAMCZEWSKI
Front view
span.
zero
on
AD-TV 200 GS
ADAMCZEWSKI
Elektronische Messtechnik GmbH
Felix-Wankel-Str. 13 74374 Zaberfeld
Tel. +49 (0)7046-875 Fax +49 (0)7046-7678
vertrieb@ad-messtechnik.de www.adamczewski.com
Isolation Amplifier AD-TV 200 ST
Descrtption:
The active isolation amplifiers AD-TV 200 ST serve for galvanic
separation, for the amplifying and for converting of analogue
standard signals 0-20mA; 4-20mA or 0-10V. The offset and the
amplification can be adapted by means of two frontal placed
potentiometers. The AD-DC power supply unit enables the supply
of 20-30V direct current as well as alternating current. All the signal
sizes are galvanically separated from each other and also from the
supply voltage (3-way separation); the output signal is
independent of the output load up to the maximum value.
The user-friendly plug module technology, which is compatible
with passive separator modules, makes a quick and easy
installation possible in a small space.
Application:
Technical data:
EMC-compatible
Galvanic isolation, amplification and transformation of analogous
signals.
construction type: 1-channel plug-in module with
terminal
power-supply: 20-30V AC or DC
power consumption: ca. 1 W
input: 0-20mA; 4-20mA; 0-10V (*)
input impedance: 50 Ohm with current-input
10 kOhm/V with voltage-input
output 0-20mA; 4-20mA; 0-10V (*)
output load: max. 500 Ohm with current-input
min. 500 Ohm with voltage-input
linearity error: < 0,2 %′
influence of temperature: < 100 ppm/K
build-up time: ca. 5 ms (0-90%)
ripple frequency: < 50 mVss
insulation test voltage: input/output: 2kV RMS
: IEC 801-4 (transient) class 3
IEC 801-5 (impulse voltage) class 3
VDE 0875, curve B (radio interference)
ambient temperature: 0 - 50 °C
(*) values must be defined by order
Printed 04/2008. We reserve the right for technical changes
Connections and dimensions: AD-TV 200 GS weight 100 g
protection: IP 20
manner of fastening:
attachment rail: NS35/7,5
connection data:
fine-wire: 4 mm2
single-wire: 4 mm2
max. voltage: 250 V~
(1)
(3)
(4)
(2)
(6)
(5)
- (~) + (~)
Power-supply
+
-
Input
+
-
Output
Order
specification
output 0-20 mA
output 4-20 mA
output 0-10 V
input
0-20 mA
TV 200 ST-22
TV 200 ST-24
- 产品
- 供应
- 公司
- 新闻
