| 机床型号 | Item | VMC713加工中心 |
| 工作台尺寸mm | Pallet size | 1000*420 |
| 左右行程(X)mm | X axis travel | 600 |
| 前后行程(Y)mm | Y axis travel | 400 |
| 上下行程(Z)mm | Z axis travel | 500 |
| 主轴中心至立柱导轨距离mm | Distance from spindle center to column guide | 427 |
| 主轴端面至工作台面距离mm | Distance from spindle nose to table | 100-600 |
| 工作台T 型槽 | T-type tank | 3-14*100 |
| 主轴刀柄 | Type of taper hole | BT40 |
| 主轴转速(rpm) | Max spindle speed | 8000 |
| 主轴马达功率(Kw) | Spindle power | 3.5/5.5 |
| X.Y.Z轴伺服电机(Kw) | Three-axis servo power motor | 1.0/1.0/1.5 |
| X.Y.Z电机联接方式 | Three-axis motor coupling | 直联(Direct Torque motor) |
| X、Y、Z轴导轨方式 | Three-axis rail way | 滑轨(Slide-rail) |
| 工作台最大荷重(kg) | Max.weight on pallet | 400 |
| 换刀速度sec | Tool changing time(tool-to-tool) | 1.8 |
| 选刀方式 | Tool selection mode | 就近任选(The nearest) |
| 刀库容量（把） | Tool storage capacity | 16（斗笠式）/(Carousel) |
| 最大刀具重量Kg | Max.tool weight | 8 |
| 最大刀具长度mm | Max.tool length | 250 |
| 最大刀具直径mm | Max.Tool diameter | φ90 |
| XYZ快移速度m/min | Rapid traverse rate | 10/10/10 |
| 切削进给速度m/min | Cutting feed speed | 8 |
| XYZ定位精度mm | Positioning precision | ±0.008/±0.006/±0.006 |
| XYZ重复定位精度mm | Repeatability | ±0.004/±0.004/±0.004 |
| 机器外形 (L×W×H) | L*W*H | 2600×2200×2650 |
| 机床总重(t) | Weight | 3 |
