河北骏豪机械设备有限责任公司
联系人：张经理13933000298
钢板厚度
一般好一点的3.0t的车采用的是4mm钢板，而差一些的钢板厚度加上油漆厚度都达不到4mm，有的甚至只能达到3mm，这样偷工减料换来的价格优势，对消费者是很不付责任的。这样的车容易在后续的使用中出现故障。另外，标准型的5.0t的手动液压车钢板厚度也要达到8mm以上，否则很难承受如此自重。
Plate thickness
A good general 3.0T car adopts 4mm steel, and some of the thickness of the steel plate with the thickness of the paint is not up to the 4mm, some even can only reach 3mm, so Jerry in exchange for the price advantage, it is irresponsible to consumers. Such a car is prone to malfunction in subsequent use. In addition, the standard 5.0t manual hydraulic car, steel plate thickness should reach more than 8mm, otherwise it is difficult to bear such self-respect.
其实，人都是逼出来的，每个人都是有潜能的，生于忧患，死于安乐。只有今天你做了别人不愿做的付出，明天才可以拥有别人不能拥有的东西。不要担心别人会做得比你好，与其羡慕别人，不如自己努力，你只需要每天做得都能比前一天更好一点就可以了。
每天作常规检查，及时排除异常现象，不要使用有故障的车子，以延长使用寿命。如有故障应请专业人士来排除故障，同时如要更换零部件，则零部件应由生产制造商提供。各转动关节每三个月加马达油一次，特别注意轮子和轴不要被杂物缠住，保持所有轮子转动轻便，以符合安全性要求。
Routine inspection every day, in time to eliminate abnormal phenomena, do not use faulty cars, to extend the service life. If a fault occurs, a professional shall be required to troubleshoot it, and the parts shall be supplied by the manufacturer if the parts are to be replaced. Turn the joints every three months with motor oil, pay particular attention to wheels and shafts, do not be entangled with debris, keep all wheels turning light, in line with safety requirements.
人生的成功，一半要争，一半要随。争，不是与他人，而是与困苦。人生最大的敌人是自己，战胜得了自我，才能赢得了梦想。随，不是随波逐流，而是知止而后安。能力与条件的限制，很多人事只能随遇而安，随缘而止，切莫徒增烦恼。争，人生少遗憾；随，知足者常乐。切莫该争时不争，该止时不止，总在纠结中蹉跎，在蹉跎中耽搁，在耽搁中颓败。
手动液压车是工厂 仓库 车间最为常用的搬运工具，因为其造型简单，功能强大而美名曰“地牛”。但是这个简单的设备也经常会出现这样或者那样的毛病，比如上升缓慢，下降缓慢。或者干脆升不起来。
Manual hydraulic car is the most commonly used tools for handling the factory warehouse workshop, because of its simple shape, powerful and beautiful name "cattle". But this simple device often suffers from one or the other, such as rising slowly and slowing down slowly. Or I can't raise it.
