What is a rubber hose
橡胶止水带是以国产优质标一天然橡胶和各种合成橡胶为主要原料,掺加各种促进剂剂及填充剂,经塑炼、混炼、硫化、模压而制成的一种止水带产品,它就是利用橡胶的高弹性，在各种压力荷载下产生弹性变形,从而起到坚固密封,可以有效地防止建筑构造的漏水,渗水并起到减震缓冲作用。在国家许多大型工程建筑设计中,土建、水土结构之间都有一定的伸缩要求，并存在防水防震等要求，因此采用和安装橡胶止水带是有效地解决以上工程中遇到种种问题。
The rubber sealing strip is made of high quality standard natural rubber and various synthetic rubber as the main raw material, adding accelerant agent and filler, a sealing strip products by plastication, mixing, curing and molding is made, it is the use of high elastic rubber, produce elastic deformation under pressure load. In order to strengthen the seal, can effectively prevent the construction of the Water Leakage, seepage and play a cushioning. In many large national engineering and architectural design, there are some expansion requirements between civil engineering and water and soil structure, and there are requirements for water and shock proof. Therefore, the adoption and installation of rubber water stop are effective solutions to all problems encountered in the above projects.
The rubber sealing belt for settlement joints is made of natural rubber and synthetic rubber as main raw materials, and all kinds of accelerators and fillers are mixed with various kinds of accelerators and fillers, which are made by mixing, mixing, vulcanizing and molding.
该材料具有良好的弹性,耐磨性、耐老化性和抗撕裂性能,适应变形能力强、防水性能好,温度使用范围为-45℃-+60℃.当温度超过70℃,以及受强烈的氧化作用或受油类等有机溶剂侵蚀时,均不得使用橡胶止水带.。应用于地下构筑物、水坝、贮水池、游泳池、屋面以及其他建筑物质和构筑物的变形缝防水.当使用橡胶止水带是在混凝土浇注过程式中部分或全部浇埋在混凝土中，混凝土中有许多尖角的石子和锐利的钢筋头，由于塑料和橡胶的撕裂强度比拉伸强低3-5倍，止水带一旦被刺破或撕裂时，不需很大外外力裂口就会扩大，所以在止水带定位和混凝土浇捣过程中，应注意定位方法和浇捣压力，以免止水带被刺破，影响止水效果,具体注意事项
The material has good elasticity, abrasion resistance, aging resistance and tear resistance to deformation ability, good waterproof performance, temperature range of -45 DEG -+60 DEG. When the temperature exceeds 70 degrees, as well as by strong oxidation or by oil and other organic solvent erosion, not to use the rubber sealing belt. Used in underground structures, dams, water pool, swimming pool, roof and other building materials and building deformation joint waterproof. When using the rubber sealing strip is in the concrete pouring process in all or part of pouring buried in concrete, there are many sharp stones and sharp head reinforced concrete, the tear strength when the plastic and the rubber tensile 3-5 times lower, waterstop once punctured or torn, without external force gap will expand, so the waterstop positioning and concrete pouring process, should pay attention to positioning method and pouring pressure, so as to avoid the water stop is punctured, influence the sealing effect, the specific matters needing attention
