EP背贴橡胶止水带350*6mm
背贴式橡胶止水带是指外贴式中间有孔的橡胶止水带产品，又称外贴式止水带或背贴式止水带，主要有EB型橡胶止水带和EB型塑料止水带两种。EB型止水带主要适用于混凝土构筑物底板或壁板外侧（构筑物迎水面），实际应用时主要使用在水压及变形量较小的变形缝、伸缩缝、沉降缝等，具有与混凝土锚固紧密、止水密封及适应伸缩缝拉伸变形等特点，是我公司根据多年橡胶止水带生产经验，并结合《给水排水工程混凝土构筑物变形缝设计规程》CECS117：2000开发生产的一种新型外贴式止水带。示例：
The back attached rubber water stop is a rubber sealing belt with a hole in the middle. It is also called the external type water stop or the back type water stop. There are two kinds of EB rubber water stop and EB type plastic water stop belt. Type EB sealing strip is mainly applicable to concrete structures (lateral bottom or wall structures upstream), the actual application is mainly used in deformation pressure and smaller deformation joints, expansion joints and settlement joints, with close, anchorage and concrete seal and adapt to the characteristics of expansion joints tensile deformation, is my company according to many years of production experience and the rubber sealing belt, combined with the "water supply and drainage engineering concrete structures deformation joint of a new design specification" CECS117:2000 development and production of stick type waterstop. Examples:
EP背贴橡胶止水带350*6mm
EP300×6-30(CR)表示由生产的外贴式中间有孔的埋入式氯丁橡胶止水带，宽度为300mm,厚度为6mm，变形缝宽30mm。
EP300 * 6-30 (CR) is an embedded chloroprene rubber belt with a width of 300mm, a thickness of 6mm, and a 30mm width of the deformation seam.
EB型止水带是指外贴式中间有孔的止水带，又称外贴式止水带或背贴式止水带，主要有EB型橡胶止水带和EB型塑料止水带两种。EB型止水带主要适用于混凝土构筑物底板或壁板外侧（构筑物迎水面），实际应用时主要使用在水压及变形量较小的变形缝、伸缩缝、沉降缝等，具有与混凝土锚固紧密、止水密封及适应伸缩缝拉伸变形等特点，是我公司根据多年生产经验，并结合《给水排水工程混凝土构筑物变形缝设计规程》CECS117：2000开发生产的一种新型外贴式止水带。
The EB type water stop is a water stop belt with a hole in the middle. It is also called the external type water stop or the back type water stop. There are mainly two kinds of EB type rubber water stop and EB plastic water stop. Type EB sealing strip is mainly applicable to concrete structures (lateral bottom or wall structures upstream), the actual application is mainly used in deformation pressure and smaller deformation joints, expansion joints and settlement joints, with close, anchorage and concrete seal and adapt to the characteristics of expansion joints tensile deformation, is my company according to many years of production experience, combined with the "water supply and drainage engineering concrete structures deformation joint of a new design specification" CECS117:2000 development and production of stick type waterstop.
EP背贴橡胶止水带350*6mm
示例：EP300×6-30(CR)表示由衡水中意工程橡胶生产的外贴式中间有孔的埋入式氯丁橡胶止水带，宽度为300mm,厚度为6mm，变形缝宽30mm。
Example: EP300 * 6-30 (CR) represents the embedded type neoprene sealing belt with external perforated middle holes produced by Hengshui Zhongyi engineering rubber, the width is 300mm, the thickness is 6mm, the deformation joint width is 30mm.
背贴式橡胶止水带作用与原理背贴式橡胶止水带是利用橡胶的高弹性，在各种荷载下产生弹性变形，从而起到坚固密封，有效地防止建筑构造的漏水，渗水并起到减震缓冲作用。在许多工程建筑设计中，土建、水土结构之间都有一定的伸缩要求，并存在防水防震等问题，因此采用和安装橡胶止水带是有效地解决以上种种问题的手段。本产品主要用于混凝土现浇时设在施工缝及变形缝内，与混凝土结构成为一体的基础工程、地下设施、隧道涵洞、输水渡槽、挡水坝等，确保工程建设的使用寿命。
河北瑞博橡塑制品有限公司是一家集橡胶支座，橡胶止水带，伸缩缝等工程橡胶制品为主的专业生产企业。欢迎各界朋友莅临参观指导，业务洽谈。欢迎致电：13166570832
