铸铁
同参数产品
动力类型：
机械传动
同参数产品
外形尺寸：
510*208*157
同参数产品
型式：
角固式虎钳
同参数产品
钳口宽度：
208（mm）
同参数产品
最大张开度：
260（mm）
同参数产品
钳口高度：
64（mm）
同参数产品
定位键高度：
0（mm）
同参数产品
紧固螺栓直径：
0（mm）
同参数产品
适用机床：
皆可
同参数产品
是否库存：
是
同参数产品
是否批发：
是
同参数产品
定位键宽度：
0（mm）
同参数产品
倾斜角度范围：
0（°）
同参数产品
虎钳精度：
精密型
同参数产品
品牌：
vertex 台湾鹰牌
同参数产品
型号：
va-8l
同参数产品详细说明
| order no. | a | b | c | a | d | gross weight | meas.cft | code no. | inquriy |
| va-4 | 102 | 36 | 103 | 325 | 243 | (c) 20 | 0.5 | 1002-030 | inquriy |
| va-5 | 131 | 36 | 110 | 357 | 278 | (c) 30 | 0.9 | 1002-031 | inquriy |
| va-6 | 152 | 46 | 142 | 418 | 328 | (c) 42 | 1.5 | 1002-032 | inquriy |
| va-8 | 200 | 62 | 197 | 548 | 416 | (w) 80 | 2.7 | 1002-033 | inquriy |
| vd675 | 152 | 38 | 190 | 552 | 381 | (c) 43 | 1.5 | 1002-034 | inquriy |
| va-8l | 203 | 60 | 266 | 596 | 330 | (w) 80 | 2.7 | 1002-035 | inquriy |
| vertex angle fixed milling vise va-4,5,6,8 台灣鷹牌角固式虎鉗 featuresangle lock & rotate milling vise tw, taiwan,mc power vise milling machine accessories: machinery,industrial vise,clamping kit,机床附件,台灣鷹牌,**倾斜vise,內外藏, vise強力油壓,倍力增壓, vise角固,k型tw, taiwan,,超開口,mc橫立兩用,机床附件,分度盤, ,rotary table,dividing head,hydraulic vise, precision pneumatic,mechanical vise,台灣横立两用分度盘, ,头,台湾厂,可倾斜分度盘,头tw, taiwan,,machine,分度盘、分度头production台湾,机床附件vise,鹰牌,manufacturing,台湾虎鉗可倾斜分度盘,taiwan,分度盘, vise分度头,供应,台鹰牌回转工作台tw, taiwan,, machine free vise,power feed,milling倍力增压,角固,k型,超开口,mc虎钳供应vise,床附件, tw, taiwan,台灣鷹牌,**倾斜,內外藏,強力油壓,鹰牌,**倾斜,内外藏,强力油压, indexer,angle,lock,fixed power vice,modular倍力增壓, tw, taiwan,角固,k型vise,超開口,mc虎鉗r&d,research,develop鹰牌,supplier,supply, ,可倾斜分度盘,头,gin,鹰牌,机床附件,custom design, ,供应, mc power vise milling tw, taiwan,machine accessories: vise倍力增壓,角固,k型,超開口,mc虎鉗台湾厂台湾taiwan,rotary table,维昶, ower vice,modular machine free vise,power feed,milling台,可倾斜,供应,台鹰牌回转工作台tw, taiwan,vertex the best tool, ,机床附件,台湾,机床附件,鹰machinery,industrial vise,clamping kit,rotary table,dividing head,hydraulic vise, precision pneumatic, tw, taiwan,mechanical vise, indexer,angle,lock,fixed p 1.use highest quality ductile iron 80000 psi for minimum bending. 2.the enclosed lead screw and sliding surface are harden and ground. 3.highest clamping power. it’s very accurate and durable. 4.this vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. therefore, the workplace does not move up, even if it is held at the top of the jaw plates. 5.four setting positions of the jaw plates are available, widening the jaw plates opening. 6.the new vd675,va-8lhave two major improvements: a wide opening jaw and a new stationary jaw that features an intergral key,larger fasteners which reduce deflection by 50% |
