横河ACP71通信卡ACP71通信模块
ACP71 PROFIBUS Communication Module
The ACP71 PROFIBUS Communication Module sends/receives data to/from I/O devices which support PROFIBUS- DP.
Item |
Specifications |
Model |
ACP71 |
Transmission spec |
EIA-RS485-compliant |
Communication speed |
9600 bps to 12 Mbps |
Signal isolation |
Yes |
Connector |
D-Sub 9 pin (Female) |
How connected |
T connector (Detachable on line.) |
Transmission route |
Shielded twisted-pair cable (*1) |
Transmission distance |
Max. 1.2 km per segment (when communication speed is 9600 bps) |
No. of ports |
One port |
Display spec |
RDY: Displays that ACP71 is ready. MRDY: Displays that communication modules are ready. MRUN: Displays that data is now sent/received. MERR: Displays that an error is detected on the media. |
Configuration port |
Connector: D-Sub 9 pin (male) Interface: RS-232C (not isolated) |
Current consumption |
1.2 A or less (5.0 V DC) |
*1: Refer to PROFIBUS Specification EN50170 Volume 2.
横河ACF11
现场总线通信模块ACF11Fieldbus Communication Module
The Fieldbus Communication Module sends/receives data to/from fieldbus-connected field devices.
Item |
Specifications |
Model |
ACF11 |
Interface |
FOUNDATION™ fieldbus (Low speed voltage mode) |
Communication speed |
31.25 kbps |
Function |
LAS function Network power supply function |
Field Device Connection |
See “Foundation Fieldbus Communication Package (for ACF11)” (GS 33Q03L50-31E). |
Network power supply |
Output voltage: 18 to 20 V DC Continuous output current: 80 mA or less Transient output current: 100 mA or less (20 ms or less) Output ON/OFF: Specify in the card (When using external power supply, the output is OFF. |
Current consumption |
1.4 A or less (5.0 V DC) |
Signal isolation |
Signals are isolated between field and system. Withstanding voltage: 1500 V AC/min. |
Bus connection |
Connect two terminals with M4 screws. Terminal: detachable Compliant terminator: YCB138 |
How installed |
Installed in the Communication ModuleNest. The module cannot be combined with ACM11/ACM12 Communication Module. |
Ethernet Communication Module (for PFCS/PFCD)
Subsystems are connected to the Field Control Station via Ethernet communications.
Item |
Specifications |
Model |
ACM71 |
Physical Layer Interface |
IEEE802.3 10BASE-T |
How connected |
Point-to-point. Connected to hub. |
Connector |
RJ45 |
Communication speed |
10 Mbps |
Transmission route |
100 V twisted-pair cable (not shielded) |
Transmission distance |
100 m per segment |
No. of ports |
One port |
Media access control |
CSMA/CD |
Display spec |
SND: Displays that data is sent to a network. RCV: Displays that data is received from a network. RDY: Displays that hardware is normal. |
Current consumption |
1.2 A or less (5.0V DC) |
Weight |
0.3 kg |
How installed |
Installed in the Communication Module Nest. The module can be combined with ACM21, ACM22 |
日本横河yokogawa模拟量输入输出模块/CS3000卡件：
AIP171，AIP502，AIP511，AIP521，AIP532，AIP571，AIP601，AIP827
电缆：YCB111 YCB141 YCB149 YCB118 YCB148 YCB301 ATA4S ATA4D ATK4A ATT4S ATR8S ATT4D ATR8D ATI3S ATI3D ATI3A ATB3A
其他横河DCS卡件备件 CS1000模块备件 横河DCS电池 电源 CS3000卡件备件：AFS40D AFG40D AFS40S AFG40S ACB41 ACB31 AFS30D AFG30D AFS30S AFG30S AFS81D AFG81D AFS82D AFG82D AFS83D AFG83D AFS84D AFG84D AFS81S AFG81S AFS82S AFG82S AFS83S AFG83S AFS84S AFG84S AFF50D AFF50S AFF30D AFF30S
AFV10D AFV10S ANB10D ANB10S ANR10D ANR10S
日本横河yokogawa电源模块：PW602 PW604 AEP7D AEP9D PW482 PW442 PW444 PW484
日本横河yokogawaCPU模块：CP345 CP401 CP451 CP451-10 CP701 CP703
日本横河yokogawa总线接口模块：SB401 EB401 EC401 EB402 EB501 EB511
日本横河yokogawa通讯模块：
ALP111 ALP111-S00 ALP111-S01
ALF111 ALF111-S00 ALF-S01
ALR111 ALR111-S00 ALR111-S01 （RS-232通讯模块）
ALR121 ALR121-S00 ALR121-S01 （RS - 422 /RS - 485通讯模块）
ALE111 ALE111-S00 ALE111-S01 （以太网通信模块）
日本横河yokogawa电源、电池、DCS卡件/模块：
ALD112、AEA3D、AEA4D、AET4D、AED5D、AEF9D、AER4D、S9581UK、S9325UK
S9765UK、S9400UK、S9583UK、S9072UD、S9080UK、S9766UK、S9628UK、S9322UK
S9559UK、S9415UK、S9764UK
CP345、CP701、PW702、AIP521、PW302、PW482-10、SB401-10、S9578VK、S9504VK
PW701、S9039FA、S9027UV、S9879UK、S9129FA、S9502VK、S9580VK、S9504VK
S9506VK、S9579VK、S9109VK、A1546EF、S9528VK、S9762UK、S9767UK
S9763UK、S9490UF、PW704、CP702、PW301、PW304、RB301
AAI143，AAI143-S00，AAI143-H00模拟输入模块（4到20毫安，16通道，隔离）
AAI141，AAI141-S00，AAI141-H00模拟输入模块（4到20毫安，16通道，隔离）
AAV141，AAV141-S00 模拟输入模块（1至5伏，16通道，隔离）
AAV142，AAV142-S00 模拟输入模块（-10至+ 10，16通道，隔离）
AAI841，AAI841-S00，AAI841-H00 模拟量输入/输出模块
（4至20毫安输入，4到20毫安输出，8路输入/输出通道，隔离）
AAB841，AAB841-S00模拟量输入/输出模块
（1至5伏的输入，4到20毫安输出，8路输入/输出通道，隔离）
AAV542，AAV542-S00模拟输出模块（-10至+ 10，16通道，隔离）
AAV144，AAV144-S00 模拟输入模块（-10至+ 10，16通道，隔离）
AAV544，AAV544-S00模拟输出模块（-10至+ 10，16通道，隔离）
AAI543 ，AAI543-S00，AAI543-H00 模拟输出模块（4到20毫安，16通道，隔离）
AAT141，AAT141-S00 毫伏输入模块（16通道，隔离）
AAR181，AAR181-S00电阻输入模块（12通道，隔离）
AAI135，AAI135-S00，AAI135-H00模拟输入模块（4到20毫安，8通道，隔离通道）
横河ACP71通信卡ACP71通信模块
