CMC-E46N电焊条
特别适合用于深抽模具的R角修复与高硬度之拉延部位制作。可直接焊补于铸铁模具GGG70L、FCD、GM241等…熔金细密、具极高的耐磨硬度、易抛光。属高效焊条(熔填率
120%)球墨铸铁、灰口铸铁与火焰淬火铸钢也可直接堆焊。
CMC-E46N HRC 45-48 2.4, 3.2
直接在铸铁上施焊，对于冲压模的金属磨耗非常有效。焊接金属第一层为奥氏体组织；从2层开始为马氏体组织耐磨耗性好。火焰淬火铸铁也可直接堆焊。
CMC-E46H HRC 44-49 3.2*350mm
特别适合用于钼铬铸铁模具的R角修复与拉延部位制作。熔金细密、易抛光可防止钣件的刮伤；硬度高，适用于高要求的拉延筋制造。球墨铸铁、灰口铸铁与火焰淬火铸钢也可直接堆焊。
UTP 673工模具焊条
特 性
Cr Mo W V多元合金钢耐磨堆焊材料,通过热处理可调整堆焊金属的硬度,耐热到550℃.
Cr Mo w. v. multivariate alloy wear-resistant overlaying welding materials, heat treatment can be adjusted by the hardness and resistance buttering metal 550 degrees Celsius.
用 途
用于堆焊冷作热作工具,模具.如压铸模具,锻造工具 热修整工具和冷切刀,可堆焊在低合金钢上制成工具. Used for surfacing cold ReZuo tool, die casting die forging. Such as heat, cold and tool grinding tools, cutting knife can be made in the low alloy steel # tools.
规 格
2.6￠ 3.2￠ 4.0￠
CARBO 6W各种刃口堆焊使用
特 性
高铬成份,耐磨耗耐龟裂性能优良,焊后硬度较高,机械加工困难. High chrome component, abrasion resistance, resistance to crack excellent performance after welding, machining difficulty high hardness.
用 途
淬火硬化模具钢刃口的修补,适用于SKD11合金工具钢,淬火后的模具钢修补. Quench hardened steel blade of repair, applicable to SKD11 alloy steel, alloy after quenching repair.
规 格
2.6￠ 3.2￠ 4.0￠
TM-2000模具硬化堆焊用
特 性
对冲压模的金属磨耗非常有效,焊金第一次为奥氏体组织,第二层为高硬度的马氏体组织.火焰淬火钢也可以直接堆焊. The metal stamping mould for abrasion is very effective for the first time, welding gold austenitic organization, the second is the high hardness martensite steel quenching. Flame may also directly hardfacing.
用 途
直接堆焊各种铸铁材的模具. All sorts of cast iron material directly surfacing of mould.
规 格
2.6￠ 3.2￠ 4.0￠ 5.0￠
GNK-8C打底焊条
特 性
高铬成份,焊金具有高拉力,高韧性 HB-280. High chrome component, high strength, welding gold high toughness HB - 280.
用 途
铸钢模硬面制做打底缓冲层,裂缝敏感度较高的特种钢接合衬焊使用. Cast steel hardfaced making render buffer layer, crack sensitive use of special steel lining welding joints.
规 格
2.6￠ 3.2￠
|
特别适合用于深抽模具的R角修复与高硬度之拉延部位制作。可直接焊补于铸铁模具GGG70L、FCD、GM241等…熔金细密、具极高的耐磨硬度、易抛光。属高效焊条(熔填率 CMC-E46N HRC 45-48 2.4, 3.2 直接在铸铁上施焊，对于冲压模的金属磨耗非常有效。焊接金属第一层为奥氏体组织；从2层开始为马氏体组织耐磨耗性好。火焰淬火铸铁也可直接堆焊。 CMC-E46H HRC 44-49 3.2*350mm 特别适合用于钼铬铸铁模具的R角修复与拉延部位制作。熔金细密、易抛光可防止钣件的刮伤；硬度高，适用于高要求的拉延筋制造。球墨铸铁、灰口铸铁与火焰淬火铸钢也可直接堆焊。 |
特 性
Cr Mo W V多元合金钢耐磨堆焊材料,通过热处理可调整堆焊金属的硬度,耐热到550℃.
Cr Mo w. v. multivariate alloy wear-resistant overlaying welding materials, heat treatment can be adjusted by the hardness and resistance buttering metal 550 degrees Celsius.
用 途
用于堆焊冷作热作工具,模具.如压铸模具,锻造工具 热修整工具和冷切刀,可堆焊在低合金钢上制成工具. Used for surfacing cold ReZuo tool, die casting die forging. Such as heat, cold and tool grinding tools, cutting knife can be made in the low alloy steel # tools.
规 格
2.6￠ 3.2￠ 4.0￠
特 性
高铬成份,耐磨耗耐龟裂性能优良,焊后硬度较高,机械加工困难. High chrome component, abrasion resistance, resistance to crack excellent performance after welding, machining difficulty high hardness.
用 途
淬火硬化模具钢刃口的修补,适用于SKD11合金工具钢,淬火后的模具钢修补. Quench hardened steel blade of repair, applicable to SKD11 alloy steel, alloy after quenching repair.
规 格
2.6￠ 3.2￠ 4.0￠
特 性
对冲压模的金属磨耗非常有效,焊金第一次为奥氏体组织,第二层为高硬度的马氏体组织.火焰淬火钢也可以直接堆焊. The metal stamping mould for abrasion is very effective for the first time, welding gold austenitic organization, the second is the high hardness martensite steel quenching. Flame may also directly hardfacing.
用 途
直接堆焊各种铸铁材的模具. All sorts of cast iron material directly surfacing of mould.
规 格
2.6￠ 3.2￠ 4.0￠ 5.0￠
特 性
高铬成份,焊金具有高拉力,高韧性 HB-280. High chrome component, high strength, welding gold high toughness HB - 280.
用 途
铸钢模硬面制做打底缓冲层,裂缝敏感度较高的特种钢接合衬焊使用. Cast steel hardfaced making render buffer layer, crack sensitive use of special steel lining welding joints.
规 格
2.6￠ 3.2￠
