GJQ－105 电离式火焰监测器主要用于燃气工业燃烧器的火焰监测。检测性能可靠，可
以排除积炭、布线分布电容的影响，只对火焰敏感，对高温无反应，具有强抗干扰性能。
················································································································
一、功能：
控制点火装置自动点火，点火时自动打开燃料阀，在设定时间内没有点燃，控制器自动关闭
燃料阀并报警，如点火成功则保持燃料正常供应。
·····················································································································
二、主要技术指标
1.电源电压 220V ±10% 50/60HZ
2.火焰检测 电离电极
3.检测响应时间≤0.2 秒
4.电极使用温度 长期 1300℃
5.探头与监测器连接距离 ≤100 米
···························································································································
三、壳体 ABS 工程塑料
1.体积 155×90×55mm、不包括插头尺寸
2.安装尺寸 135×52mm 安装孔Φ4－Φ5 mm
···························································································································
四、检测电极 pyromax 高温合金
1.直径Φ12 伸入火区Φ4
2.安装螺纹 M14×1.25
3.安装检测电极必须能接触到火焰，检测孔Φ12.5mm，电极长期工作温度 1300℃，不需冷却。
