CK6140ZX CK6146ZX CK61250ZX CK6240ZX CK6250ZX 数控车床
>数控系统编程采用ISO国际代码，键盘手动输入，并配有RS232通信接口，设有断电保护和各种自诊断功能 The machine adopts ISO international code and Keyboard Manual Data Input,It is also provided with programs of power cut-off protection and the functions of automatic diagnosis,and with Rs232infer-face.
> 车床纵横向由伺服电机驱动，精密滚珠丝杠传动.Longitudinal and cross feeds are effected by servomotor drive through ball screws.www.qdzcjc.com
> 刀架有四工位、六工位、立式或卧式可供选用，采用精密度端齿盘定位，也可选用排刀，重复定位精度高。Either vertical or horizontal 4-station or 6-station tool postor gang tools can be selected.The post is located on precision contrate gears with ahigh repeated positioning accuracy.
> 卡盘和尾座有液压、手动可供选择 Both chuck and tailstock are supplied with hydraulic or manual type.
> 数控车床床身导轨经超音淬火后精磨而成，使用寿命更长，精度高The surface of the bedways is supersonic frequency hardened and precision ground with a long service life.
> 主轴通孔Φ80mm，主轴系统刚性好。主轴为变频无级调整。The spindle bore size is 80mm.The spindle system is high in the rigidity and accuracy,An invertor is used to realize variable speed.
项目ITEMS |
CJK6140ZX/ CJK6240ZX |
CJK6146ZX/ CJK6246ZX |
|
床身上最大回转直径 |
Over bed |
Ø400 mm |
Ø460 mm |
刀架上最大回转直径 |
Over carriage |
Ø210/Ø165 mm （排刀型Gang tools） |
Ø250/Ø105 mm （排刀型Gang tools） |
最大工件长度 |
Maximum turned length |
750/1000 /1500 mm |
|
最大车削长度 |
Max. turning length |
620/870/1370 mm |
|
*马鞍内最大回转直径 |
Max. swing in gap |
Ø660 mm |
Ø700 mm |
*马鞍内有效长度 |
Effective length of gap |
300 mm |
|
主轴头型式 |
Spindle nose |
D8 |
|
主轴通孔直径 |
Spindle bore |
Ø80mm |
|
主轴孔锥孔直径及锥度 |
Cone hole diameter and taper of spindle hole |
MT No.7 |
|
主轴转速级数 |
Steps of spindle speed(Manual) |
12 |
|
主轴转速范围 |
Range of spindle speed |
38~1680 r/min |
|
纵向快速移动速度 |
Rapid feed for Axis Z |
10m/min |
|
横向快速移动速度 |
Rapid feed for Axis X |
8m/min |
|
纵向最大行程 |
Max. travel of Axis Z |
710/960/1460 mm |
|
横向最大行程 |
Max. travel of Axis X |
250/330（排刀型Gang tool） |
|
最小输入单位 |
Min. input |
0.001mm |
|
刀架工位数 |
Tool post stations |
四工位、六工位或排刀 4-ways or 6-ways or gang tools |
|
车刀刀杆截面尺寸 |
Tool cross section |
25×25 mm |
|
尾架套筒外径 |
External diameter |
Ø75mm |
|
尾架套筒内孔锥度 |
Taper of bore |
MT No.4 |
|
尾架套筒最大行程 |
Max. Traverse |
95mm |
|
X/Z向电机扭矩 |
X/Z motor torque |
4.7/7Nm |
|
主电机功率 |
Power of main motor |
5.5KW(特订7.5KW) |
|
冷却泵电机功率 |
Power of cooling pump |
75W |
|
机床外形尺寸(长×宽×高) |
Overall dimensions(L×W×H) |
2060/2310/2790×1150×1450 mm |
|
机床净重（㎏） |
Net weight |
2250、2450、2950 |
|
注：打*为带马鞍系列 The item with “*:” are only for 62 series |
|||
