性能特点 Main Features
l 用于铝门窗型材端面的加工。大型工作台、大走刀行程,一次可加工6至10根型材。位置可调整的多片刀具,使得更换型材时不必更换刀具,从而节约生产准备周期和刀具费用。根据不同的型材,多组刀可以同时工作也可以单独工作。更大的刀具直径,使加工范围增大。加厚的型材压板,防止型材变形。通过气液转换完成工作进给,工作更平稳,可完成加强中梃的铣削加工。
l 加工端面粗糙度:Ra12.5μm。
l Used in processing the side surface of profiles for aluminum windows & doors.Relied on large worktable and long feed distance, 6~10 pieces of profiles can be processed at the same time.Adjustable multiple cutters need not be replaced when the profiles changed, which can save the preparation period and cost of tools. Multiple cutters can work on different profiles individually as well as simultaneously.Larger diameter of cutter makes the processing extent expanded. Thickened pressing board can aviod the deformation of the profiles.The feeding is completed through the transformation of gas and liquid, which makes the work more stable.
l Processing roughness:Ra12.5μm
技术参数 Technical parameters
输入电源 |
Power supply |
380V 50Hz |
输入功率 |
Total power |
2×2.2KW |
电机转速 |
Motor rev |
2850r/min |
气源工作气压 |
Air pressure |
0.5~0.8MPa |
铣刀直径 |
Diameter of milling cutter |
Φ250mm |
外形尺寸 |
Dimension |
2100×1200×1550mm |
工作台尺寸 |
Work Table dimension |
530×320mm |